Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: BDCS on July 07, 2011, 10:07:22 pm

Title: Prochem Steempro uprated pump
Post by: BDCS on July 07, 2011, 10:07:22 pm

Hello, has anybody fitted the new 150 psi pump in place of the old style 70,100 or 135 psi pumps ? I have just completed mine after being told it was tight but they go straight in - well sort of  ??? Mine was a 100psi 2100 which is 6 years old but is not in use constantly and the pump packed up recently so a new better pump was ordered. You need to fit the new pump round the other way and slide the base plate to one end having moved the screw positions on the middle holes. If it would help anyone I will post pictures

Title: Re: prochem steempro uprated pump
Post by: M.Acorn on July 07, 2011, 10:11:02 pm

I fitted a flojoe pump in mine 160psi,have you adjusted the pressure release valve on the machine ? May blow the seal in the pump if not

Title: Re: prochem steempro uprated pump
Post by: BDCS on July 07, 2011, 10:29:35 pm

No they said no need to alter anything

Title: Re: prochem steempro uprated pump
Post by: markpowell on July 08, 2011, 11:35:40 pm

As mark says you will need to adjust the pressure valve mate

Title: Re: prochem steempro uprated pump
Post by: BDCS on July 10, 2011, 08:20:44 pm

Ok - talk me through it please