Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: lozsing on July 06, 2011, 05:59:29 pm

Title: twin di therory
Post by: lozsing on July 06, 2011, 05:59:29 pm

twin di therory............can someone remind me how this works please

Title: Re: twin di therory
Post by: ♠Winp®oClean♠ on July 06, 2011, 06:10:45 pm

Your old resin pre-filters a vessel with new resin in. You keep this cycle going then instead of throwing a vessel full of resin away that's reading 002/003 etc. My tap tds is around 70/80 ppm, the older resin never rises this far before the newer resin needs changing anyway, so I get the maximum efficiency from it. ;)

Title: Re: twin di therory
Post by: lozsing on July 06, 2011, 08:42:10 pm

so the resin bottle i have which is kicking out 3ppm will go in line before my new bottle with new resin , is that correct.
thanks

Lawrence

Title: Re: twin di therory
Post by: elite mike on July 06, 2011, 08:43:09 pm

yes

Title: Re: twin di therory
Post by: ♠Winp®oClean♠ on July 06, 2011, 11:06:18 pm

Quote from: elite mike on July 06, 2011, 08:43:09 pm

yes

Yes too ;D

Title: Re: twin di therory
Post by: ♠Winp®oClean♠ on July 06, 2011, 11:09:21 pm

Quote from: lozsing on July 06, 2011, 08:42:10 pm

so the resin bottle i have which is kicking out 3ppm will go in line before my new bottle with new resin , is that correct.
thanks

Lawrence

Yes mate, it will pre-filter the new resin, so the new resin is being fed 3ppm instead of what it would be without it. ;)

When the new resin eventually starts to rise in tds do the same again- change the oldest resin for fresh stuff & use the other to pre-filter it. Keeps going like this. ;)

Title: Re: twin di therory
Post by: Wc Solutions on July 07, 2011, 10:13:03 am

not a therory, just simple fact!

one vessel starting to kick out water of say 10+tds - norm you would just change the resin.

but with two vessels

you then plug the second one in with fresh resin.

so that fresh resin is cleaning the first vessels water from 10+ tds down to 000tds.

and as that fresh resin is only cleaning from around 10 tds it will last longer.

then

when the first vessel starts kicking out say 80 tds + then you chuck that resin.

so then the second bottle becomes the first and the orginal first bottle has fresh resin in it and becomes the second vessel .

Title: Re: twin di therory
Post by: Londoner on July 07, 2011, 10:24:12 am

Its good to say that before you make the old resin bottle the prefilter bottle its a good idea to roll it around or shake it up a bit.

Title: Re: twin di therory
Post by: Wc Solutions on July 07, 2011, 10:25:41 am

Quote from: Vince Green on July 07, 2011, 10:24:12 am

Its good to say that before you make the old resin bottle the prefilter bottle its a good idea to roll it around or shake it up a bit.

i know thats supposed to open new channels in the resin but im doing something wrong regards that one - either stays the same or make it worse

Title: Re: twin di therory
Post by: Alex Allen on July 07, 2011, 12:34:02 pm

give it a few minutes to settle