Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Fraser Thom on July 06, 2011, 05:35:18 pm

Title: Problem with Sebo Duo
Post by: Fraser Thom on July 06, 2011, 05:35:18 pm

My sebo duo keeps cutting out these days.  When I take it apart, it appears one of the belts is loose. 

Has anyone had any experience of this and, if so, is it just a case of sourcing a new belt and replacing?

Who sells them anyway?

Title: Re: Problem with Sebo Duo
Post by: markpowell on July 06, 2011, 10:39:05 pm

Break in power cable maybe ?

Mark

Title: Re: Problem with Sebo Duo
Post by: Mark_Jubb on July 06, 2011, 11:12:11 pm

Like Mark says, could well be a cable break, it is quite common, usually at around the point where the cable goes into the top of the handle.
However, if one of the belts is loose, you could have a loose bearing, often caused by the screws that hold the bearings in place not gripping properly in the body of the chassis. Check all the screws along the line (7 or 9 if I remember correctly). Unfortunately, if the fixing in the chassis is damaged, your "screwed" so to speak.

Title: Re: Problem with Sebo Duo
Post by: steven Banks on July 06, 2011, 11:17:06 pm

Quote from: Fraser Thom on July 06, 2011, 05:35:18 pm

My sebo duo keeps cutting out these days. 

Check the two spade connectors where it push fits together at the bottom.