Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: GB Window Cleaning on June 15, 2011, 08:34:26 pm
-
so when i tried to put 50 mtr 6mm hose on my 80 psi pump after about 2 minutes the pump stoped ???
the supplier i bought it from said it might be the presure switch! i dont know anything about pumps so what did he mean exacly?
i even cut the hose to 25 mtrs and the pump still stops, strange!
-
The pump stopped and never worked again or the pump kept cutting in and out?
-
What make of pump is this ???????????????
i use a flojet which i could give advice on . i used a shuflo i could allso give advice on that .
-
The pump stopped and never worked again or the pump kept cutting in and out?
it stopped so i put the original 8mm, 6 mtr length back on!now it seems to work perfect again.
-
What make of pump is this ???????????????
i use a flojet which i could give advice on . i used a shuflo i could allso give advice on that .
i'll check later! thanks
-
if i were you mate i would just go back to trad
-
you need to turn the pressure switch up - little allen grub screw on top of the pump, turn it clockwise until the pump runs continually (with the hose fully wound up).
-
you need to turn the pressure switch up - little allen grub screw on top of the pump, turn it clockwise until the pump runs continually (with the hose fully wound up).
thanks for that mate!