Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H2O TECH on June 15, 2011, 07:44:01 pm
-
Hi
I only just set up my system last night, and got my water down to 0.00 using a RO 300 and 11L DI
So new resin went in last night, and brand new RO which gets my water down to 13 before it goes into the DI.
My water is 430
and I only want to make 100-200L per day, approx how long should i expect the water to be 0.00? and need to to buy resin?
Also what TDS is the limit for using once it starts to go up i.e 0.08 ?or more or less.
Regards
-
Will last a while that mate! Especially as you arent using a massive amount. I dont usually start worrying till it gets to 10 ish. Although i did let it go to 020 last time, you care less and less me you do this mate ;D
-
keep the water at 000ppm mate to be safe. brush well and rinse with with a high flow rate, then hopefully you wont have all the prolems im having!
-
keep the water at 000ppm mate to be safe. brush well and rinse with with a high flow rate, then hopefully you wont have all the prolems im having!
What problems that? Mine at 020 were drying ok...well no complaints, i changed it because i felt i should.
-
http://www.gardinerpolesystems.co.uk/acatalog/De-Ionisation_Calculator.html
Use this calculator...this would be worse case as you can keep working above tds 0000 if you wanted
-
cool seems to be approx 5-6 months thats not to bad.