Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H2O TECH on June 14, 2011, 02:52:48 pm
-
ive got an 11L vessel and 10 L of resin, vessels never been used, do I just put it in drink ive heard you can mix it with water making it slush then pour into it, will the water out of my RO be ok, its 15TDS or would it have to be 0.00
or do I just fill it up dry to the neck, its prob very simples but i dont want to screw it up (no pun)
is it fool proof?
-
the best way i,ve found,is to put a cone shape in the hole first,(in order not to get any resin on the thread) cause it,s a bit of a bugger trying to screw the top on with grit in the thread. Fill resin 3/4 of way up, and then pour pure water in to cover the resin, after that bung the top on,,,job done,,if you try putting the top on without putting the water in first you,ll find it difficult to get the thread to turn because it never seems to drop straight down through the resin ,,hope that helps
-
Search on You Tube for 'replacing DI resin' there's at least two methods on there - the slushy way and filling 3/4 then topping up with water.
Dave
-
wont you get air bubbles with water on top method? how pure has the water got to be? can it be the water my RO does at 15 tds? cheers
-
http://www.youtube.com/watch?v=j1TocCGTRRw
I made this a few weeks back, as ive said on here before i was filming with one hand so you can be a lot more careful than me!
;)
Nice and easy
-
http://www.youtube.com/watch?v=j1TocCGTRRw
I made this a few weeks back, as ive said on here before i was filming with one hand so you can be a lot more careful than me!
;)
Nice and easy
Hey
cheers for that, ok so i have the same bucket as you, so if i put all 10L into that yeah? then how much water am i adding approx? and how high are you filling ya di ? near top or shoulder?
-
I usually go about 3/4 full of resin, remember you gotta get that lid back in there! And you just add water to make it slushy bud, there isnt like a set amount or anything.
-
so not even up to the shoulder? i thought id have to put the full 10L into it?
i have 2 5L bags, how many liters of resin should I put in my 11L tank then?
Cheers
-
Well get it in if you can ;) Its hard getting lid in though when its rammed with resin, i cracked my lid cause id put too much in once and struggled putting it back on.
-
wld a whole 10 be a sqeeze then? i dont want to crack it lol you get no instructions on these things its a joke you have to ask on a forum lol
-
p.s can the water i pour in be 15tds?
-
p.s can the water i pour in be 15tds?
yes
-
done it boys, followed all ya advice, now i got a water reading of 0.00 yey!!! all this to thow it over a bloody window ha ha
-
Easy when you know how.
-
my kitchen looks like a bloody water park mate lol funny as with a bloody big water butt in thier as well ha got to start somewhere hey getting a bigger place in oct so will bear the water purifiing caper in mind when selcting a place ha