Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: charles911 on May 10, 2011, 08:13:18 pm

Title: alltech and a mytee
Post by: charles911 on May 10, 2011, 08:13:18 pm

would a mytee heater work on the alltech 600 psi tripple vac porty?? ( the new one)

sounds great apart from the third vac motor/heater thing as with all porty x3 motors (i think)

while im on about it.... what do you think about the alltech??

before i forget.... ny 1 got bonnet cleaner for sale?? (max 200 rpm pref 150)

cheeers :)

Title: Re: alltech and a mytee
Post by: steven Banks on May 10, 2011, 08:49:40 pm

If your refering to the mytee inline heater, then yes it should work fine.

Title: Re: alltech and a mytee
Post by: diamond on May 11, 2011, 02:46:13 pm

Hi Mytee Steve
I take you are well clued up on the speedster.
My pump when turned on sounds good but there is no pressure when I am trying to prime. I take it the motor is ok but the pump is knackered.
I have had my speedster for 4 years and have had nothing but grief from it.
Cheers
Alastair

Title: Re: alltech and a mytee
Post by: steven Banks on May 11, 2011, 06:20:48 pm

Have you checked to see if there is fresh clean solution entering the waste tank? The reason i say that is because you could have it in prime mode which diverts the solution away from the wand and into your waste tank. Check your solution hose too.  Other than that open up the machine and check for leaks. Failing that consider buying a replacement pump.
If you need a replacement there is one on ebay iirc.