Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: steven ainger on May 07, 2011, 12:36:50 pm

Title: Shut off setup with a booster pump
Post by: steven ainger on May 07, 2011, 12:36:50 pm
I've just got a new storage tank, which has thicker Walls than my old tank, which means the the old float valve with the micro switch attached won't fit. So I was wondering what setup others use to turn off the water supply and booster pump together.
Thanks
Title: Re: Shut off setup with a booster pump
Post by: Lee GLS on May 07, 2011, 12:38:54 pm
use one of these and wire it into your pump

http://www.machinemart.co.uk/shop/product/details/float-switch-230v-2m-cable/path/hoses-couplers-valves-filters
Title: Re: Shut off setup with a booster pump
Post by: steven ainger on May 07, 2011, 01:12:28 pm
Thanks for the link, but I need to stop the pump & the water supply together, and this won't do that, or am I being thick ??
Title: Re: Shut off setup with a booster pump
Post by: Lee GLS on May 07, 2011, 02:59:00 pm
You suspend the float switch from the top of the tank, when the water reaches it the float switch will then float which will turn the pump off and then stop the tank filling
Title: Re: Shut off setup with a booster pump
Post by: steven ainger on May 07, 2011, 03:04:16 pm
the water still keeps coming after the pump has been turned off just through the water pressure  ???
Title: Re: Shut off setup with a booster pump
Post by: CRYSTAL1984 on May 07, 2011, 05:00:20 pm
call me I can help you
Craig at
www.procareproducts.co.uk
Title: Re: Shut off setup with a booster pump
Post by: Spruce on May 07, 2011, 07:17:06 pm
You also need to connect the float switch to a normally off 1/2" 230v solenoid valve. The float valve will switch off both the pump and the water flow from mains at the same time as they will be wired together.
Example;

http://www.airlines-pneumatics.co.uk/webcat/Detprod.asp?ProductCode=S07012210

This type of valve is like a tap. Put current to it and it opens and lets the water flow. Remove the current and is automatically closes the valve so no water flows. If you have a power failure everything will switch off and once power is restored, your R/O will continue to process water - you won't even know its happened.

Some have adapted a washing machine shutoff valve which is a lot cheaper. My concern here would be an electrical safety issue which would need to be considered and the valve would need to be supported.

http://cgi.ebay.co.uk/HOTPOINT-CREDA-Single-Inlet-Solenoid-Valve-180-Degrees-/370166593945?pt=UK_Home_Garden_Washing_Machines_Dryers_Parts_Accessories_ET&hash=item562fa5f999

Spruce