Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: ants on April 07, 2011, 07:34:34 pm

Title: Fitting aqua-adapter spring
Post by: ants on April 07, 2011, 07:34:34 pm

Any0ne got any tips on how to fit them please its got me beat

Title: Re: Fitting aqua-adapter spring
Post by: Smudger on April 07, 2011, 08:06:56 pm

best way for me is as follows - attach spring end to the moving AD part, then using long nose pliers you can grab
the free end of the spring and gently pull it out allowing you to thread the little cap onto the end

jobs a good un!

Darran

Title: Re: Fitting aqua-adapter spring
Post by: ants on April 07, 2011, 08:28:31 pm

Cheers Smudger ive just done it......following ur instructions.Thanks mate.

Title: Re: Fitting aqua-adapter spring
Post by: Smudger on April 07, 2011, 08:30:18 pm

 ;D

no probs

Darran

Title: Re: Fitting aqua-adapter spring
Post by: dazmond on April 07, 2011, 10:32:52 pm

is this a fault on the aqua-daptor?how many springs have you got through in the time you ve had it?

it seems a good bit of kit although its making the top of the pole heavier which i dont like really but ive ordered the SL EXTREME BRUSH so hopefully itll make it lighter again.I REALLY NOTICE IT ABOVE CONSERVATORIES AND AWKWARD ANGLES.defeats the object of having an slx IMO.


If the springs keep breaking they should replace them free of charge or provide stronger ones.

The aqua-daptor is a tad expensive for a pole tap to be having these problems.

Title: Re: Fitting aqua-adapter spring
Post by: Lee GLS on April 07, 2011, 10:36:50 pm

Daz, they will send you news springs free, but they have just brought out an uprated spring, so hopefully it will last a lot longer