Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: oliver collins on April 06, 2011, 07:03:50 pm

Title: Chair cleaning best chem
Post by: oliver collins on April 06, 2011, 07:03:50 pm

Hi guys

I am cleaning 200 chairs they are of man made poly type of materail,i was going to use craftex dry foam cleaner and then rinse with chemspec acdic high heat ,but i just noticed that craftex note on the bottle it does not reccomend the use of HWE with this chem which i would be using to rinse it with, any ideas which wold be the best cleaning procedure i have as follows a list of my chems that i could use.Highheat,one clean,Formula 90 powder,pure clean ,extracters alkline powder,and all the normal presprays you could think of

Any tips would be useful Thank you Oliver Collins Rise & Shine Cleaning

Title: Re: Chair cleaning best chem
Post by: gwrightson on April 06, 2011, 07:16:57 pm

a simple h/w/e should suffice on poly  , i cleaned 12 like this recently no chems ,

Geoff

Title: Re: Chair cleaning best chem
Post by: oliver collins on April 06, 2011, 07:22:44 pm

Hi

I did think that but wondered if a foam cleaner would speed things up

Title: Re: Chair cleaning best chem
Post by: clinton on April 06, 2011, 07:27:46 pm

if your doing the job on your own leave extra time as its a job that gets slower after 100 chairs ;D

Title: Re: Chair cleaning best chem
Post by: Linds Russell on April 06, 2011, 07:33:15 pm

Pre-spray with Chemspec heavy duty soil lifter mixed 1:10, agitate, allow 10 minutes dwell and rinse with water then towel off. Pre spray 10 chairs at a time to let the system work in the time frame and then rinse in the same order.

Bob's your uncle and Fanny's a rude word ;D

Title: Re: Chair cleaning best chem
Post by: Andy Hogarth on April 06, 2011, 08:04:18 pm

I did some right mingers in a nursing home the other week, about 10 years of sweaty head grease!!!

Ended up using hot powerburst on the really bad sweaty head areas.

Mostly used craftex microsplitters and a good brushing though

Title: Re: Chair cleaning best chem
Post by: Jim_77 on April 06, 2011, 10:24:35 pm

Just use the foaming stuff but make sure your machine's outside :D

Title: Re: Chair cleaning best chem
Post by: Shaun_Ashmore on April 06, 2011, 10:34:05 pm

Clinton you puff get your hair cut and stop being a girls blouse ;D

Shaun

Title: Re: Chair cleaning best chem
Post by: John Kelly on April 07, 2011, 08:28:44 am

The whole idea of using the foam shampoo is to save time by not having to rinse off. You brush or towel the foam into the fabric then you towel off or if you want to vac off just using the vacuum of your machine.

Title: Re: Chair cleaning best chem
Post by: Mike_Roper on April 07, 2011, 01:28:56 pm

I like to use a crystalizing shampoo ,add some energizer, then apply using a window cleaners scrunge, brick sized sponge with scrub pad on one side.
The benefit of this is you clean all the curved edges really well.
You cn then towel it ,vac it or if it needs hwe with liquid high heat or similar. defoam in tank.
Mike