Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Smudgeoff Cleaning Services on April 03, 2011, 12:44:11 pm

Title: RO & DI problems
Post by: Smudgeoff Cleaning Services on April 03, 2011, 12:44:11 pm

HI all,

I have recently changed the resin in my di unit as I was getting readings of around 18.

After the ro and membranes I am getting around the same reading so changed the resin and flushed system and  now getting between 4 & 11 have i not put enough resin in or is there another problem.


please help

thanks darren

Title: Re: RO & DI problems
Post by: woody1 on April 03, 2011, 01:08:02 pm

had the same prob fill it up as much as you can so its compacted in there also make sure the lid is tight so can make a good seal

Title: Re: RO & DI problems
Post by: Smudgeoff Cleaning Services on April 03, 2011, 02:25:27 pm

O k mate thanks.

Woody is it  to late for this batch of resin or can i still top it up...

Daz

Title: Re: RO & DI problems
Post by: woody1 on April 03, 2011, 04:50:54 pm

try it mate top up to the brim and push it down then put the lid on matethey are very tempemental

Title: Re: RO & DI problems
Post by: Smudgeoff Cleaning Services on April 03, 2011, 05:12:39 pm

Will do cheers Woody...

Title: Re: RO & DI problems
Post by: Tom White on April 03, 2011, 05:17:05 pm

The best way to get resin into one of those chambers is to cut down a small coke bottle into a scoop.  It fits perfectly and it's far less messy.  I then tap the resin down and fill with a bit of water; this helps compact the resin, and then I put more resin in, a little more water if need be, tap down and then try to get more resin in.

Title: Re: RO & DI problems
Post by: Smudgeoff Cleaning Services on April 03, 2011, 05:20:06 pm

Thankyou tosh