Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: brianbarber on March 13, 2011, 06:24:41 pm

Title: Flowmaster controller flow rates
Post by: brianbarber on March 13, 2011, 06:24:41 pm

Hi guys

Usin a pure freedom flow master controller, I use at between 38 and 45
However, as I am a bit paranoid about thorough rinsing, I tend to double rinse to be on safe side,
My question is should I just increase to say 50 and just one rinse ?

And what setting do you guys use?

Any feedback greatly appreciated.

Mr B

Title: Re: Flowmaster controller flow rates
Post by: luther1 on March 13, 2011, 06:26:08 pm

47 on domestic for me

Title: Re: Flowmaster controller flow rates
Post by: bobplum on March 13, 2011, 06:33:59 pm

i was told by purefreedom to go for 20,the trouble is its to slow so over a period of time i kept increasing and like the last reply i use it on 45 on my own and 70 when double manned

Title: Re: Flowmaster controller flow rates
Post by: dazmond on March 14, 2011, 01:53:24 pm

60 on mine all the time.i use 5mm extension hose with 2mm jets.dont know if that makes a difference.at 20 id be there for ages on each window!i like it nice and high!! ;) ;D ;D

Title: Re: Flowmaster controller flow rates
Post by: Bobs Window Cleaning on March 14, 2011, 03:36:59 pm

I have mine on 35, any higher and the water starts splashing off the window ???

Bob

Title: Re: Flowmaster controller flow rates
Post by: H S and Son on March 14, 2011, 03:42:16 pm

I had mine set at 70 today, you use far less water.

Title: Re: Flowmaster controller flow rates
Post by: jarvy on March 14, 2011, 04:17:15 pm

Wow,i'm just tight with my water then! Use between 20-30!

Title: Re: Flowmaster controller flow rates
Post by: Scrimble on March 14, 2011, 07:00:08 pm

i have mine set at about 40, but when my battery voltage starts dropping i turn it up max 50

Title: Re: Flowmaster controller flow rates
Post by: dave.e on March 14, 2011, 07:05:39 pm

mine is set at 80 with 1.5mm jets but  trying theses new jets out will start using at 40 max