Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: richy27 on March 12, 2011, 09:01:35 am

Title: chip and pin update
Post by: richy27 on March 12, 2011, 09:01:35 am

well had my terminal for couple of weeks now  .  havent taken a single cheque worked out charges compared with the bank and i am about 12 quid out of pocket     BUT i have done 2 jobs small ones mind £80 and £65  that booked me solely because they could bung it on the the credit card   

Title: Re: chip and pin update
Post by: Jon Tabbener on March 12, 2011, 01:55:30 pm

So by looking at it another way Richard you are £133 up  ;D

Title: Re: chip and pin update
Post by: mark shannon on March 12, 2011, 02:58:36 pm

Who are you using Richard?

Title: Re: chip and pin update
Post by: richy27 on March 12, 2011, 05:45:53 pm

Quote from: Jon Tabbener on March 12, 2011, 01:55:30 pm

So by looking at it another way Richard you are £133 up  ;D

exactly


i used handipay

Title: Re: chip and pin update
Post by: spicnspan the cleaning man on March 12, 2011, 07:40:56 pm

What was your set up cost with handipay

Title: Re: chip and pin update
Post by: richy27 on March 12, 2011, 09:25:16 pm

no set up charge

Title: Re: chip and pin update
Post by: clive ware on March 13, 2011, 03:09:19 pm

Hi Richard.
Got my terminal now. Did you start using yours straight away by reading the instructions or were you shown how to use it by the rep? Tried one transaction last night which worked ok so I can start using it tomorrow. Do you keep it turned on all day or do you turn it on and off as you use it?
Cheers, Clive

Title: Re: chip and pin update
Post by: richy27 on March 13, 2011, 03:49:14 pm

clive    you prob found as i did easy to setup install   . just punch in merchant id number and it automatically downloads software from various card providers.   i leave mine on charge overnight so basically whenever i am home its on the charge dock.

you will need to reconcile your terminal every now and again sing your retailer card  easy to do  if you get in a muddle give us a buzz


regards

Rich

Title: Re: chip and pin update
Post by: clive ware on March 13, 2011, 08:07:21 pm

Cheers Rich. So do you leave it on all day?

Title: Re: chip and pin update
Post by: richy27 on March 13, 2011, 08:11:08 pm

mine has no on and off button   stays on 24 7    its an ingenico   terminal

Title: Re: chip and pin update
Post by: clive ware on March 13, 2011, 08:18:59 pm

I`ve got the same one Rich. If you push the yellow `clear` button and the star button next to the enter button at the same time, it turns off. Then, when you push the bottom left hand button thats got a little circle with a 1 inside it, it turns it back on. Have you got the 930g?

Title: Re: chip and pin update
Post by: richy27 on March 13, 2011, 08:41:22 pm

yes have the same clive   cheers for that wont be turning on and off much     paper rolls are expensive  lol

Title: Re: chip and pin update
Post by: clive ware on March 14, 2011, 07:38:54 pm

Well that was fun. Did my first transaction today for £110. Customer, an elderly lady was very impressed by the terminal. Anyway i keyed in the £110 and obviously forgot to push enter. I then gave it to my customer to put her pin number in and then push enter. Looked at the screen and her 4 numbers had gone on to the total, giving a grand total of over £110,000!! Anyway, between us we worked out how to cancel the transaction and start again!

Title: Re: chip and pin update
Post by: david washbrook on March 14, 2011, 07:53:01 pm

richard and clive

how much are you paying for these machines and do you have to pay a monthly rental and a min per month spend

been thinking about this for a while but barclays wanted about £50 per month

thanks
dave