Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: derek west on February 08, 2011, 06:38:06 pm

Title: hydraforce part
Post by: derek west on February 08, 2011, 06:38:06 pm

gonna be hard to explain this but i'll give me best shot

hydraforce consists of a container, a lance, a flexi pipe which attaches to the main bit.

i'm trying to source the main bit which need to consist of a male and female QC, one at each end and the the bit in the middle as well as the little pipe with filter (on the end) that goes into the container (which i don't need.

called martin at hydramaster to ask if they do one and to send me a pic, he said its called a ventura but it looks nothing like what i need.

any ideas on what i need and where to get it from?

Title: Re: hydraforce part
Post by: Nigel_W on February 08, 2011, 06:58:31 pm

Hi Derek,

Martin is right - The main part of a Hydroforce sprayer is the Venturi valve. It is called this because it draws up the prespray concentrate using the  "Venturi effect". So the main bit should consist of a Venturi valve and the various connnectors required to attached to your solution hose and spray lance. I would have thought Hydramaster or Alltec would be the best places to try in the UK. Alternatively go to the States and get it posted to you.

Nigel

Title: Re: hydraforce part
Post by: Shaun_Ashmore on February 08, 2011, 06:59:30 pm

Any good?

http://www.interlinksupply.com/schematics/as08_breakdown_new.pdf

Shaun

Title: Re: hydraforce part
Post by: derek west on February 08, 2011, 07:10:00 pm

yeah cheers shaun.

bloomin nora, thats a lot of parts, looks like it'll be cheaper to buy a new hydraforce and add a female QC and chuck the rest.

just looked nige and the ventura is (according too shaun diaphram, ha ha diagram, part number NA0809, 50 odd quid. :o :o :o

Title: Re: hydraforce part
Post by: Len Gribble on February 08, 2011, 07:17:09 pm

Thanks Shaun as I’ve got one in bits for a customer seems to have a few bits’ missing