Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: brianbarber on February 02, 2011, 07:16:48 pm

Title: Power burst dwell
Post by: brianbarber on February 02, 2011, 07:16:48 pm: Hi guys

As I usually allow 5 to 10 mins dwell time,for dirty to filthy carpets,
Would you say there is an optimum time to leave the power burst before extraction?

Mant thanks

Mr B
Title: Re: Power burst dwell
Post by: Carpet Dawg on February 02, 2011, 07:26:40 pm: Ask Daniel, he's DA MAN!! :)

I suggest anything from 5 to 15 minutes dewell time on mingers (depends on the condtion of the carpet and the type of carpet, thickness etc). Just make sure its not dried out by the time you decide to exract.

Tony
Title: Re: Power burst dwell
Post by: daniel harbut on February 02, 2011, 07:52:45 pm: Quote from: Carpet Dawg on February 02, 2011, 07:26:40 pm
Ask Daniel, he's DA MAN!! :)

I suggest anything from 5 to 15 minutes dewell time on mingers (depends on the condtion of the carpet and the type of carpet, thickness etc). Just make sure its not dried out by the time you decide to exract.

Tony

dan the powerburst man 8) haha

I agree with the dawg! 5 mins usually or 10-15 on bad jobs
Title: Re: Power burst dwell
Post by: Neil Williams on February 02, 2011, 10:55:41 pm: Quote from: Carpet Dawg on February 02, 2011, 07:26:40 pm
Just make sure its not dried out by the time you decide to exract.

Is this product an enzyme?
Title: Re: Power burst dwell
Post by: Griffus on February 02, 2011, 11:11:38 pm: Quote from: Neil Williams on February 02, 2011, 10:55:41 pm
Quote from: Carpet Dawg on February 02, 2011, 07:26:40 pm
Just make sure its not dried out by the time you decide to exract.

Is this product an enzyme?

Powerburst is a detergent pre-spray.

http://www.prochem.co.uk/safety%20data%20sheets/sdss789.pdf
Title: Re: Power burst dwell
Post by: derek west on February 02, 2011, 11:37:30 pm: no dwell time for me, just the time it takes to enviro it in.
Title: Re: Power burst dwell
Post by: Griffus on February 03, 2011, 12:05:00 am: Quote from: derek west on February 02, 2011, 11:37:30 pm
no dwell time for me, just the time it takes to enviro it in.

That's your dwell time then Derek ;D
Title: Re: Power burst dwell
Post by: Simon Gerrard on February 03, 2011, 08:30:45 am: Powerburst works best within 5 - 10 minutes, any longer and it becomes less effect, I find. it also has to be hot and must be acid rinsed.

Simon