Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Lee GLS on January 02, 2011, 08:26:03 pm
-
Has anyone done a DIY swivel reel, i have mine fixed at the moment facing sideways going through ports in the side of the van, but some times it would be easier to have them coming out of the back doors, i know i could have them free standing, but i would sooner have them so they cant go flying.
-
Mine swivel.
www.souterwindowcleaning.co.uk
Just a spike out the bottom, dunno how you could do it in a Van though.
-
Do you have any pics of it? had a look on your site but couldnt really see. Are they quite sturdy like that?
-
No pics, ill get some if you like. Back at work on Tuesday.
Yea they are solid as a rock mate. 1" thick steel spike.
-
A pic would be great if thats ok, thanks.
-
gazza put some pictures on here of a swivel mounting that he made .
-
I think someone off here modified a swiveling seat base and bolted reel to that
-
Hose:
-
Landrover:
-
Swivel:
-
Thanks for the pics form b. It's given me food for thought, it looks like if could withstand a nuclear Bomb ;D
-
Its on a landy so it has to be Iraq ready ;D
-
Get some mdf
Cut out two round pieces 500 mm in diameter
buy a small stub coffee table leg around 150 mm high
screw the plate of the leg on one piece of mdf
then bolt that piece to the van floor where you want the reel to sit.
with the leg facing up.
drill a hole in the centre of the second piece of mdf around 33 mm diameter
Pop 4 castors on the same piece.... small ones with plates for screws.
screw your reel to the top of this piece.
drop it over the coffee table leg .
done.
and you can take it out of the van anytime you like as it just lifts out of the leg.
;)
http://www.diy.com/diy/jsp/bq/nav.jsp?action=detail&fh_secondid=9282000&fh_view_size=10&fh_location=%2f%2fcatalog01%2fen_GB&fh_search=leg&fh_eds=%c3%9f&fh_refview=search&ts=1294182450945&isSearch=true
-
.
-
oops pic above was the first attempt , before the stub leg
-
cheers gazza, looks good too.