Clean It Up
UK General Cleaning Forum => General Cleaning Forum => Topic started by: Len Gribble on December 23, 2010, 07:36:05 pm
-
Dose any one do this?
-
Sherco does stone so he may, if not he may know someone - he's sort of local
-
I do using the Dr.Schutz PU Sealer range.
-
The only drawback is that vinyl floors are not resistant to heat or high-impact accidents, which cause dents, scratches and burns.
-
Prior to colour coating with PU Design dents can be filled and other damage overcoated.
-
(http://www.cleaning-systems-uk.com/pdf/SDC12233%20(Small).JPG)
(http://www.cleaning-systems-uk.com/pdf/IMAG0495.jpg)
White safety floor rinstalled in a VIP suite.
When cleaned considerable damage was found under the pine gel/beer/dirt mix coating the floor.
Discolouration, rust stains, holes from stilletto's.
The area had Dr.Schutz PU Design in one of 200 RAL shades applied then PU Anti Slip Extra Matt coated on top.
The floor was ready for the following weekend when Sepultura were playing \m/ \m/
The architect & club owners learnt that although white safety floor looks like carpet under club lighting its not particularly practical when cleaners only want to mop it every night.