Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Nameless Drudge on December 22, 2010, 09:06:52 pm
-
I am hoping that people running hot water successfully might say which hose they are using on the reel, size/make and any pitfalls expected, such as avoid 40 degrees C or more or run it at a good bit lower temp or maybe go to 50 C no problems
If i install the immersion element i have and am running hot through the resin is there a limit on the temperature before the resin starts malfunctioning or even going awol?
And lastly,do the pro hot systems(pure freedom etc) out there heat the water after the DI stage and avoid any problems the heat may possibly cause?
-
the ionics system have to settings Winter 75degrees & Summer 65 degrees.
i am using my immersion at 45 ish as i use to use the hot water from my tap and that was 65 and had no probs, i just want the water warm rather than hot
-
we have been using our thermopure at 78'C with ionics new orange 8mm isd and it bloody great stuff and its only 60 quid
we have 1 reel with ionics orange hot water hose on it and 1 reel with wcw cold water hose on it and the both of the perform exactly the same
-
We use microbore from Streamline and Gardiners, never had a problem with either. The Gardiners hose is about 4 years old now.
-
have a look at my post on hot hose ??? ???