Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Jamie Lindsay on December 20, 2010, 10:31:13 pm

Title: Spring Return
Post by: Jamie Lindsay on December 20, 2010, 10:31:13 pm
there is a spring return filter at the bottom of my wand that has bust... was wondering if anyone knew were to get these ?

its a bit like a bullet shape righ at the bottom just before the water leaves the wand

advice would be great thanks
Title: Re: Spring Return
Post by: Steve. Taylor on December 20, 2010, 10:49:50 pm
Is it like this

http://cgi.ebay.co.uk/Wand-Filter-Stainless-Steel-Mesh-/270678438729?pt=UK_HomeGarden_CLV_Cleaning_CA&hash=item3f05b13349
Title: Re: Spring Return
Post by: Jamie Lindsay on December 20, 2010, 10:52:31 pm
yes indeed sir.. is it a one size fits all ?
Title: Re: Spring Return
Post by: Steve. Taylor on December 20, 2010, 10:55:11 pm
Not sure email the guy his name is scott tell him what wand you got simplez ;D

Title: Re: Spring Return
Post by: Steve. Taylor on December 20, 2010, 11:03:21 pm
On mine i take the 21mm nuts off rinse the fluff out soak them over night in white vinegar 
Title: Re: Spring Return
Post by: Jamie Lindsay on December 20, 2010, 11:05:26 pm
do you get them behind every jt ? I only have 1 jet
Title: Re: Spring Return
Post by: Steve. Taylor on December 20, 2010, 11:08:49 pm
YES
Title: Re: Spring Return
Post by: Jamie Lindsay on December 20, 2010, 11:10:03 pm
just looked at it there looks about 21mm
Title: Re: Spring Return
Post by: Vernon Purcell on December 21, 2010, 12:34:31 am
Quote from: steveclean4472 on December 20, 2010, 11:03:21 pm
On mine i take the 21mm nuts off rinse the fluff out soak them over night in white vinegar 
Its a 13/16 nut
Title: Re: Spring Return
Post by: Steve. Taylor on December 21, 2010, 01:24:32 am
SORRY FRACTIONAL 13/16
 METRIC 20.6375 ::)
Title: Re: Spring Return
Post by: Vernon Purcell on December 21, 2010, 06:55:06 pm
Quote from: steveclean4472 on December 21, 2010, 01:24:32 am
SORRY FRACTIONAL 13/16
 METRIC 20.6375 ::)
Try getting that spanner, i was in Minnesota when I went into a tools store and picked up 4 spaners to fit the jets, how many guys have rounded the retaining cap with adjustables
Title: Re: Spring Return
Post by: Jamie Lindsay on December 21, 2010, 09:47:14 pm
got 1 today and fitted it thanks guys
Title: Re: Spring Return
Post by: Vernon Purcell on December 21, 2010, 09:54:22 pm
what size pump do you have, what size is the jet
Title: Re: Spring Return
Post by: Jamie Lindsay on December 21, 2010, 10:08:02 pm
pump is 135psi shurflo.. dont know about the jet though but think it is standard for most wands