Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Bob Allen on September 26, 2005, 08:57:42 pm

Title: Hydroforce sprayer
Post by: Bob Allen on September 26, 2005, 08:57:42 pm

I have a hydroforce sprayer that still sprays out even when ive release the trigger.
I assume its a washer gone or something.
Any ideas?

Title: Re: Hydroforce sprayer
Post by: clive on September 26, 2005, 10:56:39 pm

No.



Clive

Title: Re: Hydroforce sprayer
Post by: magic_carpet on September 28, 2005, 10:19:26 am

the valve in your trigger has blown an 'o' ring. new trigger (£15-£25)or new valve((£8-£15)or if your lucky new o ring (2p)

Title: Re: Hydroforce sprayer
Post by: Bob Allen on September 28, 2005, 07:43:33 pm

Thanks for that (cant beleive it hasnt happened to anyone else)

Title: Re: Hydroforce sprayer
Post by: Dave_Lee on October 01, 2005, 02:13:50 pm

Mine used to do that periodically, now it wont pick up any solution, only spraying water. Tried different things, nothing is working, its clean as a whistle.
Dave.

Title: Re: Hydroforce sprayer
Post by: Saul on October 03, 2005, 05:22:24 pm

Try stripping it down and checking the main hole where everything goes through (sorry about the highly confusing techno babble here). I have found that over time the hole reduces dramatically due to detergent residue build up. I simply scrape it away with the aid of a bluntish screwdriver and some acid descaler. Seems to work for me.
saul.

Title: Re: Hydroforce sprayer
Post by: Bob Allen on October 03, 2005, 08:46:18 pm

Turned out to be the male coupling, changed it and everything is now fine ..thanks for the replys