Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Newannaive on December 13, 2010, 05:05:37 pm

Title: slx needs attention!
Post by: Newannaive on December 13, 2010, 05:05:37 pm

hi peeps, anyone know whats the best glue or whatever to use?

the top sectin that the brush screws into has come out of the pole  >:(

its only 3week old!!

Title: Re: slx needs attention!
Post by: Klean07 on December 13, 2010, 05:07:39 pm

Phone em up then!!

Title: Re: slx needs attention!
Post by: Smudger on December 13, 2010, 05:09:42 pm

I used super glue gel - has not come apart since

Darran

Title: Re: slx needs attention!
Post by: Newannaive on December 13, 2010, 05:12:26 pm

might give it a try, was not sure that super glue would hold  ;)

Title: Re: slx needs attention!
Post by: AuRavelling79 on December 13, 2010, 05:19:01 pm

I use any twin barrel epoxy resin like araldite. If you email Alex you might get a freebie glue pack sent if the pole is new.

When I'm out and about working and if a clamp starts spinning on the end of a pole section I just gaffer (duct) tape it until I get home.

Title: Re: slx needs attention!
Post by: Newannaive on December 13, 2010, 05:33:48 pm

yea only got it 3week ago, i'll mail em  ;)

Title: Re: slx needs attention!
Post by: Smudger on December 13, 2010, 05:39:58 pm

It'll hold - it's lasted 5 months longer than the poxy stuff the pole was originally held together with.
- sets quicker too.

Darran

Title: Re: slx needs attention!
Post by: ♠Winp®oClean♠ on December 13, 2010, 05:42:39 pm

2 part epoxy resin.

Title: Re: slx needs attention!
Post by: Ian101 on December 13, 2010, 06:32:46 pm

seems to be standard on these poles ... I would rather pay a fiver more if they would use proper glue / resin ... did mine last week with the superglue and araldite twin syringes glue ... been fine all week ....perhaps Gardiners may like to start using it ??

Title: Re: slx needs attention!
Post by: SB Cleaning on December 13, 2010, 08:50:29 pm

Araldite

Title: Re: slx needs attention!
Post by: Daniel12 on December 13, 2010, 09:15:55 pm

i had same problem and they sent me a two part epoxy glue for free