Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: lewis_webb on December 13, 2010, 09:16:53 am

Title: Cleaning woodwork
Post by: lewis_webb on December 13, 2010, 09:16:53 am
Hi, I have been asked to clean an external wooden staircase every four months using a mild detergent.

Has anyone got any suggestions how I would do this? I know I could pressure wash it, but it seems a bit overkill every 4 months! Maybe anually.

Thanks
Title: Re: Cleaning woodwork
Post by: Phild on December 13, 2010, 11:36:01 am
It depends what your customer is actually wanting achieved. Are they worried about the aesthetic 'look' of the staircase or is it perhaps an external fire escape and they are worrying about it being slippery if people had to pile down it quickly?

If you can find out it will make your choice of cleaning method easier. Phil D
Title: Re: Cleaning woodwork
Post by: BDCS on December 13, 2010, 12:41:50 pm
Clean it and seal it with a good decking oil then you could a weak bleach or sodium percarb with a hose off. If its a fire escape I'd fit inserts or tread grips
Title: Re: Cleaning woodwork
Post by: lewis_webb on December 14, 2010, 10:49:35 am
Hi, Thanks for the replies. The steps are used every day and are not slipery. I believe they just want a montly clean to keep the aesthetic 'look' of the staircase.

Why would I need to seal it first? Could i not just mop it with sodium percarb?

Title: Re: Cleaning woodwork
Post by: Roger Oakley on December 14, 2010, 12:06:29 pm
The problem you will have cleaning that regularly even with a weak percarb or bleach mix is you will start to bleach the wood and strip the wood of it's natural oils.
You will also get a build up of dead fibres.

What is the wood by the way?
Title: Re: Cleaning woodwork
Post by: greencleaning on December 16, 2010, 01:03:47 pm
A few drops of  kerosene or turpentine on a soft cloth may be used to clean all polished surfaces. The latter cleans them more perfectly and evaporates readily ; the former is cheaper, safer, because its vapor is not so inflammable as that of turpentine, and it polishes a little while it cleans; but it evaporates so slowly that the surface must be rubbed dry each time, or the dust will be collected and retained. The harder the rubbing, the higher the polish.
Title: Re: Cleaning woodwork
Post by: BDCS on December 16, 2010, 01:11:37 pm
Its outside ! I doubt if you'd get too much of a shine  ;D
Title: Re: Cleaning woodwork
Post by: Roger Oakley on December 16, 2010, 03:27:35 pm
A few drops of  kerosene or turpentine on a soft cloth may be used to clean all polished surfaces. The latter cleans them more perfectly and evaporates readily ; the former is cheaper, safer, because its vapor is not so inflammable as that of turpentine, and it polishes a little while it cleans; but it evaporates so slowly that the surface must be rubbed dry each time, or the dust will be collected and retained. The harder the rubbing, the higher the polish.

They haven't said it is polished wood.