Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Adam Fearnley on December 12, 2010, 11:57:00 am

Title: Chinese brushes
Post by: Adam Fearnley on December 12, 2010, 11:57:00 am

Does anyone have spare brushes for 3 stage 5.7 Chinese vacs, be appreciated.

Title: Re: Chinese brushes
Post by: Paul Redden Countryfresh on December 13, 2010, 05:52:28 pm

Velly solly me no blushes  ;D  found those vacs rubbish, very noisy and the three plastic mounts all broke, mind you that was from ebay, you could try there...good luck

Title: Re: Chinese brushes
Post by: Jamie Pearson on December 14, 2010, 07:10:05 am

I can help.

Title: Re: Chinese brushes
Post by: Adam Fearnley on December 14, 2010, 10:31:14 am

Actually, I suppose any brush from a good vac will work, as long as it fits into the holder.  They are 11.1 by 5.9 by 30 mm.  I got some made up, but the carbon was alot harder than originals and sparked too much.

Cleaning Systems you can help?

Title: Re: Chinese brushes
Post by: Jim_77 on December 14, 2010, 05:01:12 pm

woodbridge, amongst many other suppliers, sell them

Title: Re: Chinese brushes
Post by: Jamie Pearson on December 14, 2010, 08:50:13 pm

I will speak to our engineer in the morning.

Do you have a contact number.

Title: Re: Chinese brushes
Post by: Jim_77 on December 14, 2010, 09:57:18 pm

Do you have google? :D

Title: Re: Chinese brushes
Post by: Jim_77 on December 14, 2010, 09:57:45 pm

wcsuk.com ;)

Title: Re: Chinese brushes
Post by: Jim_77 on December 14, 2010, 09:58:31 pm

or solution cornwall, probably express cleaning, john kelly at restormate should do, cleansmart....

Title: Re: Chinese brushes
Post by: Adam Fearnley on December 14, 2010, 11:24:34 pm

I think I may have google :-\  I have emailed woodbridge but no reply.

Title: Re: Chinese brushes
Post by: Jim_77 on December 15, 2010, 01:00:32 pm

don't hold your breath!

Best get on the phone directly, that way you can ascertain if they have the right thing for you and if so get an order in immediately