Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Lee GLS on October 17, 2010, 12:02:54 pm
-
got my new system fitted, but have a question about the pump, when there is no pole connected or the pole isnt turned on the pump cycles every few seconds and DE flashes up on the controller which i think means dead end detected, is there a way of preventing the pump from doing this?
-
this only means no water is comming out just let it flash it will do no harm its just telling you the the water flow is not in use
-
Shouldn't the pressure switch cut in instead, if I the flow rate then when the pole isn't in use the pressure switch cuts in and stop the pump cycling every few seconds, but then there is to muxh water coming out?
-
this only means no water is comming out just let it flash it will do no harm its just telling you the the water flow is not in use
I don't mind the display flashing, but don't want the pump cutting in every few seconds
-
Its perfectly normal. The pump is pressurising the system. DE= dead end=no water being used.
-
Its perfectly normal. The pump is pressurising the system. DE= dead end=no water being used.
What is the pressure switch for? Shouldn't that cut in to stop the pump when it's not in use instead of it cycling every few seconds because IRS detecting a dead end?
-
What is your calibration set at?
-
The flow is on 50 and that the auto cal sets it self at 63.
-
got my new system fitted, but have a question about the pump, when there is no pole connected or the pole isnt turned on the pump cycles every few seconds and DE flashes up on the controller which i think means dead end detected, is there a way of preventing the pump from doing this?
Lol ;D ;D
Lee dont worry mate its perfectly fine, i thought the same when mine was fitted!!
-
got my new system fitted, but have a question about the pump, when there is no pole connected or the pole isnt turned on the pump cycles every few seconds and DE flashes up on the controller which i think means dead end detected, is there a way of preventing the pump from doing this?
Lol ;D ;D
Lee dont worry mate its perfectly fine, i thought the same when mine was fitted!!
I'm too much of a fuss pot, but it looks like I will have to live with it