Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Ajpick on October 13, 2010, 07:09:14 pm

Title: Cleaning a Sebo Duo
Post by: Ajpick on October 13, 2010, 07:09:14 pm

I cleaned a curry house last night that hadn't been cleaned for 3 plus years. Duo was put through the mill and needs a really good clean. Does anyone have any tips to do this? Thanks

Title: Re: Cleaning a Sebo Duo
Post by: M.Acorn on October 13, 2010, 07:15:07 pm

I use an old fork,pushed into the brushes with it turned on,be careful though as it can snag ,then take out the brushes and wash them in a bucket,and clean the bit where the brushes go out,dry off and put back together  ;D

Title: Re: Cleaning a Sebo Duo
Post by: derek west on October 13, 2010, 07:44:48 pm

take out brushes and use a fork and scissors and a lot of elbow grease, thank fork them days are behind me.

Title: Re: Cleaning a Sebo Duo
Post by: Ajpick on October 13, 2010, 07:49:15 pm

Thanks for the replies, how do I get the brushes out? Sorry if thats a silly question. Thanks again.

Title: Re: Cleaning a Sebo Duo
Post by: derek west on October 13, 2010, 07:53:26 pm

undo screws on bottom, lift of securing caps, lift and then slide out brushes

Title: Re: Cleaning a Sebo Duo
Post by: Len Gribble on October 13, 2010, 08:00:42 pm

Turn it over so the brushes are facing you. From memory there are two Philip screws on each cover holding the brushes in undo them lift the covers off, pull out the bushes (when I had mine I pw them)

Title: Re: Cleaning a Sebo Duo
Post by: kinder clean on October 14, 2010, 01:06:36 am

Its a good idea to swap the screws for stainless ones as the std ones rust and can be a nightmare to get out ( speaking from experience )

Paul