Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: dazmond on September 23, 2010, 07:43:26 am
-
right lads this is my set up.my tap water is 35-70tds.ive been using a big 25L DI for 3 months now and its just gone up to 001.
whats the highest tds you work with(010?)without spotting the glass?
i have a small 2.7L DI as well.will it be ok to put this in tandem with the 25L DI?
ive recently got a new adaptor to fit on my bath tap so my water is coming out faster so it fills my barrels up quicker.could this affect the life of the resin?
sometimes i fill up in the morning and it now only takes 30 mins to fill 250-300L.
i dont really want it trickling out as itll takes over an hour to fill all my barrels!
im using roughly 1200-1500L A WEEK and have been wfp just over 3 months.im sure the resin should last another 3 months!!
many thanks
dazmond
-
As long as you stay in single figures 009 then you will be OK
In fact My RO takes the water down to 003 and I do not use a DI
if your water is 000 and some one elses is 009 then you will see NO difference in the clean
-
020 is meant to be naked to the human eye, dave morris uses 015 all the time, and has no problems,
-
I recently cleaned my windows straight from the outside tap as an experiment (029 ppm) and guess what, a perfect clean.
-
020 is meant to be naked to the human eye, dave morris uses 015 all the time, and has no problems,
we find that to be true aswell - aslong as its on regular jobs .... im guessing its because the glass is already really clean from last clean (as it stays cleaner for longer with wfp)
i wouldnt wanna use upto 20 on a dirty job tho