Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: mark mann on September 15, 2010, 07:54:25 am
-
Hi all
could you let me know what glue you use for fixing the clamps onto the pole when you repair/replace. its my cheapy everyday glass fibre pole.
which i seem to be reparing almost weekly :'(
thankyou for any feedback... :)
-
Araldite works for me
-
Araldite here too... They won't come off or loose again !
-
Araldite works for me
thanks you 2 - i think we use that already (it only has a part no on it as from pure freedom) its the one where you mix two types together if so im not mixing it right perhaps?
-
Araldite works for me
thanks you 2 - i think we use that already (it only has a part no on it as from pure freedom) its the one where you mix two types together if so im not mixing it right perhaps?
go to b&q and get it that has twin nozzle you push out what you need in right mix, you then use spatular provided mix it, wipe on it gets hot then fixes solid ;) have dont this witha couple of slx and xtel poles and still have some left, rapid is the one I got ;)
-
Araldite works for me
thanks you 2 - i think we use that already (it only has a part no on it as from pure freedom) its the one where you mix two types together if so im not mixing it right perhaps?
go to b&q and get it that has twin nozzle you push out what you need in right mix, you then use spatular provided mix it, wipe on it gets hot then fixes solid ;) have dont this witha couple of slx and xtel poles and still have some left, rapid is the one I got ;)
thanks mate will do that
-
go to b&q and get it that has twin nozzle you push out what you need in right mix, you then use spatular provided mix it, wipe on it gets hot then fixes solid ;) have dont this witha couple of slx and xtel poles and still have some left, rapid is the one I got ;)
Don't get that twin nozzel one, guaranteed one side will block up then you end up with just a pile of the one side, wasting loads coz there is no way to just get the blocked side out and you have to start all over again.
Just get the two tubes and mix them right ;)
-
jus use a bit ov super glue simples ;D ;D ;D