Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Wc Solutions on September 08, 2010, 05:35:22 pm
-
have high tds and di only for now, long story.
tds is about 200 and have a 11ltr di canister, always used tulsion resin from daqua and went straight to 000tds within secs.
ran out of resin and daqua was out of stock, so i got it from purefreedom.
just filled canister as normal, plugged it in (making sure in & out were correct).
water coming out at around 40!!
any help guys???
-
one thing ive just noticed: the resin is normally all soggy and thick after use - just had a look in the canister and it seems to still be fairly dry still
-
check the riser is seated tightly into the cap sometimes the water can get through
-
check that it is going in and out the right way and that the neck inside is all the way in
-
checked both and now im getting no water coming out ???
-
just taken riser out and taken it apart - put it back together all is seems to be good again.
the only thing i didnt do that i normally do is add a little water to the resin to put the riser in - i just forced it down straight through the dry resin - is that what ive done wrong??? riser not in all the way??
-
just taken riser out and taken it apart - put it back together all is seems to be good again.
the only thing i didnt do that i normally do is add a little water to the resin to put the riser in - i just forced it down straight through the dry resin - is that what ive done wrong??? riser not in all the way??
just a guess but yes
-
I always put riser in to dry resin ,never been a problem.
-
I always put riser in to dry resin ,never been a problem.
and i have never had a problem before - until yesterday. strange
-
if the riiser is in right it is a problem with the resin, that is the only thing it can be