Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: clarkson on September 07, 2010, 01:06:34 pm
-
Hi Guys
just wanted to ask you all what chemicals you are using,cc is only a bolt on for me as we do window cleaning and office cleaning in the main.
I have texatherm for large areas and an alltec for wet extraction. i use texatherm chemicals in the main.
i have used all sorts in the wet extraction which is what iam asking for, just changed supplier who is a prochem agent they are encouraging me to use prochem extract pro and an orangy? pre spotter.
what do you think to these products.
cheer
john
-
Prochem make great performing chems. If you wanted to use high performance, eco-friendly chems, do a Google search for 'World of Clean'.
-
I keep on hearing wonderful things about a product called M-Power, but have yet to try it myself. Will be getting some shortly though.
I mainly use Prochem on the whole and it seems to do the job just fine.
-
You can also use prochem bonnet buff for the texatherm..
-
I used M Power as a pre-spray on a pub that I do every month which I scrubbed in although I did HWE with my Scorpion using Ulimate Master but before I did you could see the M power doing it's work, great stuff.
I also did a small part that I do every now and then with Mpower hot @ 80-1 scrub in and dwell for 20mins followed by Fusion clean @25-1 warm and bonetted it with excellent results.
I'm now using Fusion8 with HWE and getting good results but If your only doing the odd one the Ulimate master is a good one imo as it's good and cheap.
Hope that helps.
-
I used M Power as a pre-spray on a pub that I do every month which I scrubbed in although I did HWE with my Scorpion using Ulimate Master but before I did you could see the M power doing it's work, great stuff.
I also did a small part that I do every now and then with Mpower hot @ 80-1 scrub in and dwell for 20mins followed by Fusion clean @25-1 warm and bonetted it with excellent results.
I'm now using Fusion8 with HWE and getting good results but If your only doing the odd one the Ulimate master is a good one imo as it's good and cheap.
Hope that helps.
"MPOWER HOT"
-
Use all Prochem stuff,used Powerburst for the first time on Wed doing a youth club,the place was minging,really really bad,wish i had taken some before pics,there were only a few bit`s that didn`t come out.
(http://img.photobucket.com/albums/v452/delk/DSC00851.jpg)
-
Good result at first glance mate..not sure about the fan mind you lol
-
Couldn`t open any windows,and the place was being shut up after i finished,so left that on just to move the air around a bit ;D
-
I used M Power as a pre-spray on a pub that I do every month which I scrubbed in although I did HWE with my Scorpion using Ulimate Master but before I did you could see the M power doing it's work, great stuff.
I also did a small part that I do every now and then with Mpower hot @ 80-1 scrub in and dwell for 20mins followed by Fusion clean @25-1 warm and bonetted it with excellent results.
I'm now using Fusion8 with HWE and getting good results but If your only doing the odd one the Ulimate master is a good one imo as it's good and cheap.
Hope that helps.
Mark, Sorry I mean Hot Water mate ;)
"MPOWER HOT"
-
Use all Prochem stuff,used Powerburst for the first time on Wed doing a youth club,the place was minging,really really bad,wish i had taken some before pics,there were only a few bit`s that didn`t come out.
Powerburst (Grease etc.) and UP Renovate (Filthy traffic lanes etc.) are tops for real mingers. F & F rinse a must though.
Pre-Spray nice and hot then watch the grime vanish as the Envirodri works its magic :-)
-
Thanks a lot guys, i will try them. Interested in the mpower stuff though sounds like prochem will be better for me but mpower maybe better again.
Clinton prochems bonnet buff, what method do you use for that, at the minute we use a prespray then buff out with bonnet from a tank of hot neutraliser. Do prochem have a chemical for the tank or is it a different method entirely.
cheers
john
-
Use Prochem Pureclean and nothing in your tank. Just agitate well. Job done.
-
Powerburst is brilliant stuff but Ultrapac Renovate is better imo
Mark
-
I use both of them together in the same sprayer, can't make up my mind :)
Seriously, for restoration work both are really good but neither deal with everything. The two of them together are almost invincible, but I use them at half strength and very very hot.