Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: dusthers on August 10, 2010, 04:56:11 pm

Title: leak from wand jet
Post by: dusthers on August 10, 2010, 04:56:11 pm

Hi, I have noticed over the past couple of weeks that the wand jet has a "dribble"  which is getting worse. When pump is on the dribble is slightly worse. Is this normal? Or is it a problem with the valve not shutting off properly on the wand when released.
Cheers Bob

Title: Re: leak from wand jet
Post by: Doctor Carpet (Ret'd) on August 10, 2010, 06:49:22 pm

Sounds like you need a new K valve on the wand.

Rog

Title: Re: leak from wand jet
Post by: elliott cleaning on August 10, 2010, 07:03:42 pm

or you could get some 'stubbies' for your jets

Title: Re: leak from wand jet
Post by: Carpet Dawg on August 10, 2010, 07:31:47 pm

might only need a new male or female connector on the wand. (which ever your soloution line hooks in to)

It'll be faulty, worn or taken a knock.

Tony

Title: Re: leak from wand jet
Post by: MAX Carpets on August 11, 2010, 07:26:02 am

Speak to John at Restomate, ask for a wand repair kit. Cheap and easy!

Title: Re: leak from wand jet
Post by: dusthers on August 11, 2010, 05:48:25 pm

Thanks for your info, bit miffed as the wand and hose is only 7 months old. Thanks again BobG

Title: Re: leak from wand jet
Post by: acc on August 11, 2010, 06:03:29 pm

Might just need cleaning out the K valve

Title: Re: leak from wand jet
Post by: John Kelly on August 11, 2010, 06:29:34 pm

There may be 2 filters behind the jets. These are actually valves which have a spring and ball bearing. The valve opens when you squeeze the trigger and close once you release it. This prevents the solution in the hose between the jet and the valve dripping out. These filters have a hard life and often clog up with limescale and chemical residue. Have a look and take them out and give them a good clean. Preferably leave them in some acididc rinse or vinegar overnight.

Title: Re: leak from wand jet - and getting hold of hose for wand
Post by: dusthers on August 12, 2010, 11:18:13 pm

Thanks - cleaned out the valve and jets - all ok now, learn something everyday.   Cheers bob