Clean It Up
UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: jim etchells on August 05, 2010, 02:49:03 pm
-
Whats the earliest it would be realistic to start a clean on a semi detached house in a residential area. The house is empty but I mean with regards noise pollution for the neighbours. I would happily get there for 6am but am I gonna cause problems. I have a twin vac porty and its a saturday job. Also any tips for bad draught marks. All upstairs rooms have them. Will a regular prespray, agitation and then rinse with hand tool take care of them. Its a poly carpet.
Thanks for any advice.
Jim
-
What would you do if someone was making noise 6am next door to you?
-
some where between 8 -8:30 is a reasonable time.
If its polyprop Ultrapac renovate. My opinion is its the bees knees. Just not too much heat as its plastic.
Hope that helps
Dave
-
Any time after 8 is respectable
Draught marks 3 things that work well
ultrapac renovate / citra concentrate / or one teaspoon of citrus gel in a 500ml spray bottle mix with hot water from tap spray aggitate extract rinse
Advise customer that in time they will return.
-
If it's next door to me when i'm having my weekend snooze then after 10 am but i suppose anytime after 08.30-0900, draught mark Prochem multi pro, strong mix is good
-
draught mark Prochem multi pro, strong mix is good
2nd that,i have been getting great results with the new version of Multi pro,would go as far as saying much better than Filter out !!
In fact i have more or less stopped using p/s/gold,and using Multi for everything ;D
-
On a weekday 8am would be the earliest I would start.
At a Saturday - make it 9am.
-
Thanks guys. Have multipro, ultrapac and gel in garage so should be ok.
-
some where between 8 -8:30 is a reasonable time.
If its polyprop Ultrapac renovate. My opinion is its the bees knees. Just not too much heat as its plastic.
Hope that helps
Dave
???
-
7:30am to set up , ultra pak agitate well and whack the heat up and suck the knackers out it , it will look great
;D
-
9am on a saturday, 8.30 during the week unless it's a commercial not near domestics then i would start as early as i could get up!!
colin
-
Yes i get there early then prepare the job then get going after half eight or 9 on a saturday..
-
take the machine in the house, close the door and start at 6am
it's a 2 vac portie not Concorde ;)
even out side it won't make that much noise and a thick blanket will deaden a lot of the noise
start at 8am if you think its a problem.
-
it's a 2 vac portie not Concorde ;)
If it was next door to me it would take off like concorde when I booted it down the street :D
-
take the machine in the house, close the door and start at 6am
it's a 2 vac portie not Concorde ;)
even out side it won't make that much noise and a thick blanket will deaden a lot of the noise
start at 8am if you think its a problem.
You've not heard the Airflex then Mike! lol
Enz-All on the draught marks and I'd start at 8.
-
it's a 2 vac portie not Concorde ;)
If it was next door to me it would take off like concorde when I booted it down the street :D
;D ;D ;D