Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: C.C.S. on August 04, 2010, 09:17:09 pm
-
hi just ordered cleantech's tank fitting kit.i have a 400l tank and i'm not sure how to fit it.does anyone can help me,maybe some one who actually used one.
in the package came 2 angle frames 2rachet straps some bolts and plates.but not sure how it's should be done.cheers guys
http://www.cleantech.co.uk/catalog/prod ... ucts_id=90
-
That link is not complete mate....
Have you no fitting instructions?? ;D ;D
-
no instructions
http://www.cleantech.co.uk/catalog/product_info.php?cPath=25&products_id=90
-
If you need advice on how to fit the tank then I would suggest not taking any chances with doing it yourself.
Get a professional to fit the tank and then fit the rest yourself. It's not worth the risk in my view.
I know this isn't the advice you sought but i'm just concerned for your safety.
Lance
-
B****y H**l :o :o
Well over £100 for the same stuff you can buy for less than £30
2 x lengths of angle iron from your local small engineering firm: £10.
2 x 5ton ratchet straps from http://www.rhtltd.co.uk/catalogue/index.html £13 plus delivery
Length of 12mm high tensile threaded bar plus suitable nuts £5 -ish
Fitting: been discussed on here umpteen times - just make sure it's securely attached to the chassis.
-
u got a flat or upright tank
-
just make sure it is secure so it cant slide . if your in an accident it wont do any good anyway
-
B****y H**l :o :o
Well over £100 for the same stuff you can buy for less than £30
2 x lengths of angle iron from your local small engineering firm: £10.
2 x 5ton ratchet straps from http://www.rhtltd.co.uk/catalogue/index.html £13 plus delivery
Length of 12mm high tensile threaded bar plus suitable nuts £5 -ish
Fitting: been discussed on here umpteen times - just make sure it's securely attached to the chassis.
i think it's a bit of a rips off aswell although i ordered before from cleantech and i normally have a good impression about them.so i think i will return it and get a tank frame from Peter Fogwill which is about £160 as i won't feel same with what i ordered.thank you guys
-
Hi, Iam local to you (Clacton) Who is Peter Fogwill? I also need a tank frame so we might be able to get a discount if we order 2. Iam working away from home for a 10 days so if you need to contact me ring 07810650920 Cheers Richard
-
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120582284677&ssPageName=STRK:MEWAX:IT
that's the tank frame and the website is window-tools.com
-
Yeah I saw the cleantech tank fitting kit advertised on their site ages ago. Couldn't believe what they were charging to be honest.
So I made my own from 40x40x6mm angle iron and 5 ton load straps. Cost me about £30 all in and is solid as a rock.
Peter Fogwills version looks ok, but why don't you enquire at a local engineering firm?
They will knock one up for you and you might even save money.
-
Cleantech's angle irons are made from stainless steel which will not rust.
Just try to drill an extra hole in their stainless steel angle iron and you will see the difference.
Use any other metal and you could have corrosion at a point where you need it most.
-
You don't need to use stainless, just hammerite mild steel which is more than sufficient. ::)
-
If that's OK with you with that weight behind you, OK
-
Mild steel is perfectly substantial, oxidisation (rust) will only occur if water comes into contact with bare metal. Hence by coating the angle iron with hammerite, red oxide paint or by galvanising a protective coating is ensured and will last for years with no sign of metal fatigue.
Mild steel is used in many building applications such as Bridges, Commercial Buildings, Office Blocks etc. where strength and resistance to fatigue and corrossion are critical.
Stainless Steel in all the above applications just would not be financially viable and is best suited to marine applications where it will outperform lesser robust materials.
Im confident with the choice I have made. :-*