Clean It Up

UK Window Cleaning Forum => Frequently Asked Questions & Useful Resources => Topic started by: Richard Neal on July 13, 2010, 04:39:52 pm

Title: Is 36 ppm to high?
Post by: Richard Neal on July 13, 2010, 04:39:52 pm

I am new to this pole system ???, i have been cleaning trad for nearly 5 years and have just got a second hand trolley system, the filters that came with the system had just been replaced by the last cleaner and when i first started using frday before last it was cleaning the water to 9ppm but now its up to 36ppm is this still ok?? it has a red pipe that takes the dirty water away and attached to this is a tap he did tell me something about flushing the filters but cant remember what he said! any help would be appreciated as i dont want to start cleaning windows with dirty water ;D
Thanks for your time,
Richard

Title: Re: Is 36 ppm to high?
Post by: cleewindows on July 13, 2010, 05:23:42 pm

36 is too high but 9 is about ok.turn the tap to flush the system for half a hour then try again

Title: Re: Is 36 ppm to high?
Post by: Richard Neal on July 13, 2010, 05:33:46 pm

Thanks matey i'll go and put it on now, i take it i do this while the hose is still turned on?

Title: Re: Is 36 ppm to high?
Post by: cleewindows on July 15, 2010, 12:28:51 am

Yes m8

Quote from: Richard Neal on July 13, 2010, 05:33:46 pm

Thanks matey i'll go and put it on now, i take it i do this while the hose is still turned on?

Title: Re: Is 36 ppm to high?
Post by: dazmond on July 16, 2010, 07:47:31 am

my water out of my tap comes out at 35-36tds!!

they say up to 10 tds is ok but i make sure mines 000

Title: Re: Is 36 ppm to high?
Post by: GB Window Cleaning on July 16, 2010, 06:14:52 pm

I use upto 12 ppm with no problems!