Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: stevef on September 01, 2005, 06:40:33 pm
-
I have three ionic res/multi poles, the jets on my latest one both work fine. On the other two poles (which are about 7months old) one jet is ok the outher sort of dribbles. I have been struggling but realy need to get this sorted. I have had a poke about but no good any thoughs?
Also without knowing it you guys have helped me to start a new business with a real professional approach, my round is building slowly but with mostly quality clients. without the info on here I could not have done it. so a big THANKYOU to you all!
Steve
-
i would unscrew the jet if you can and make sure it is clear
but i am no expert,just seems logical ;D
-
i allways disconnect the pipe and push the pipe end over the jet, thus running it backward, this allways clears the jet
-
Thanks Matt will give that a go
Steve
-
It's happend to me a couple of times usually as matt says take pipe off and either blow down jet from outlet side or put water flow though outlet side , what normally happens is a small bit of debris gets into the system and restricts the flow.
-
borrowed a garden hose once on a house to do a plastic con roof , after turing it on I saw a little slugg shoot up my clear pipe that runs to the brush head - bugger blocked my jet - took me 3/4 hour to pick the thing out >:(
-
Problem sorted thanks guys