Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Steve Weatherley on June 24, 2010, 09:59:47 pm

Title: How high to set flow controller
Post by: Steve Weatherley on June 24, 2010, 09:59:47 pm

My Flow controller from pure freedom goes from 0-99. Those of you with the same kind of controller what setting do you generally use? Just for the record I have mine set at 35 most of the time

Title: Re: How high to set flow controller
Post by: adixon on June 24, 2010, 10:01:15 pm

60

Title: Re: How high to set flow controller
Post by: Londoner on June 24, 2010, 10:03:09 pm

Every set up is different. Whatever works for you is fine. Don't worry about the setting.

Title: Re: How high to set flow controller
Post by: Steve Weatherley on June 24, 2010, 10:16:14 pm

at 60 I suspect my 500 litre tank would run dry after about £100 worth of cleaning  but then again i have not tried it

Title: Re: How high to set flow controller
Post by: dazmond on June 25, 2010, 12:13:43 am

ive had mine on 60 for all my first cleans.ill probably turn it down a bit on maintenance cleans or when the hosepipe ban comes into force!!!!! ;D ;D ;D ;D ;D ;D ;D :o :o

Title: Re: How high to set flow controller
Post by: Steven01903 on June 25, 2010, 07:02:42 am

My pure Freedom was set at 35 but the last month I have turned it down to 28 and find that this is fine for me

Title: Re: How high to set flow controller
Post by: Londoner on June 25, 2010, 08:07:15 am

The size of your jets makes a big difference. I use the smallest jets I can get from Cleantech and they are so much better.
Drill two 8mm holes and araldite them in.