Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: johnny_h on June 22, 2010, 10:21:49 pm
-
hi guys where would i fit a booster pump ? after the ro and before the di ? not too sure os should it be before the water goes into the ro ?
-
before the ro
Darran
-
thanks the hose that goes into the booster is micro then how do i get it into the ro part ? its from pure freedom
-
I was thinkin of ordering one of these this week, what's your mains pressure before you fitted it? An what difference has it made after you fitted it?
-
where ever your buying the pump from will be able to supply you with a step up.
-
Craig r.e my above post, could you provide me with a booster pump and what difference would it make? Also how much? I will be buyin one very very soon as my fill up time is annoying me
Ste
-
I'm allowed to answer the 2nd question! yes it would make a difference both to your production time and your TDS level after the RO.
-
booster pump goes before the ro but after the pre filters, i bought mine from purefreedom and it has nearly tripled production, waste water ratio has been reduced and now the tds is lower coming out the ro,
well worth the money
-
if it goes in between pre filters and ro then how to you fit it if your system is fitted in van would you build the booster pump in to van ?
-
You can see how to hear ;D
This was done in 2002 but you should get the general idea.
-
I'm allowed to answer the 2nd question! yes it would make a difference both to your production time and your TDS level after the RO.
how much difference? i fill a 650 ltr tank at the moment in about 48 hours if im lucky. water pressure at it best is 30psi and the tds goin in is now 115ish
-
I bought one the other day from craig, I have a 300 GPD ro from pure freedom. I have no idea what my water pressure was/is. It was taking 5.4 mins to produce 1 litre of pure water. It now takes 2 min 1 second to produce 1 litre of water, Only fitted it yesterday, very happy so far (although if I am honest I would of liked it to be faster :P )
-
I bought one the other day from craig, I have a 300 GPD ro from pure freedom. I have know idea what my water pressure was/is. It was taking 5.4 mins to produce 1 litre of pure water. It now takes 2 min 1 second to produce 1 litre of water, Only fitted it yesterday, very happy so far (although if I am honest I would of liked it to be faster :P )
Less than half the time thats good, your tds reading hopefully alot better too, glad your finding it a helpfull tool.
DO NOT RUN IT DRY!!!!
a few people forget!
-
Less than half the time thats good, your tds reading hopefully alot better too, glad your finding it a helpfull tool.
DO NOT RUN IT DRY!!!!
a few people forget!
I saw the piece of paper folded over in top of the box warning me not to do so. cheers craig. The only fault I found (nit picking really) Is that it came without any instructions, Its only because I read on here the other day that i knew where to put it!
-
They come into us with no instructions, i'll do some my self, your right it would be better.