Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: STEVEHANDS on June 13, 2010, 10:45:39 am
-
Wonder if anyone has had this problem.
I use ababout 600litres of water per week and have a 10" resin vessel, I only change the resin about every three months when the TDS reads 001, I have had a new tub of resin and after a week or two it is reading 001, does anyone think this is a dodgy batch, and what is safe to use as I have always changed mine as soon as it reaches 001.
Thanks.
-
Silly question but is it the same spec resin you are using as the last lot you used?? might be different!!!
also can i ask why you change your resin at 001?
thanks
Dave
-
Hi change mine to at oo1, thats what i was told, what do you change it at
thanks
-
It's Ok to use up to at least 10ppm
My 40-40 produces water so fast it doesn't get time to purify down to 000. Comes out of the RO at 006, through the DI and out at 002. Sometimes I don't bother changing the resin even when it isn't purifying anymore, never have any problems.
Sometimes I just take the DI out of the system altogether and use the water at whatever the RO produces. Then conscience kicks in and I put some new resin in the DI and attach it again, but whether it's necessary or not I don't know - if ever we got problems I would be a bit more careful, but as I say, we use up to 10 and even higher without getting any probs.
-
I agree with Ian, I used mine last week up to 007 with no complaints. I in fact have done tests on my own windows at home and have used water up too and with a tds of 016 and you cannot tell it apart from the 000 window. Anything from 000 to 014 is invisible to the human eye (i believe)
I used to panic if my morning reading reached 001 and change the resin.
I now leave it till it reaches 010.
Do some of your own tests at home, it will save you a small fortune in resin if you go through alot of water.
I use 900 to 1000 per day so it saves me.
hope this helps
-
Sorry had to go out earlier, but thanks to all, answer to why I change at 001 is because just being too careful when I first started and just kept doing that
Thanks again that helps.
The reading has went back to 000
-
make sure that the resin is virgin and not regenerated ::)
-
Hiya STEVEHANDS mate...
Buy yaself another resin bottle & when ya gunna change resin put it in a seprate bottle & attach it b4 the other di bottle....this way ya gunna completley use it up----saves waste 8)
Just me 2p worth
Kind regards lads
Justin ;)
-
keep the water at 000 and you cant blame it, that simple,
p.s pure water is 000 ;)
-
Wonder if anyone has had this problem.
I use ababout 600litres of water per week and have a 10" resin vessel, I only change the resin about every three months when the TDS reads 001, I have had a new tub of resin and after a week or two it is reading 001, does anyone think this is a dodgy batch, and what is safe to use as I have always changed mine as soon as it reaches 001.
Thanks.
Is this RO or DO? I chnge my vessel every few days now, cos of the water quality change, it's around 55 after a couple of days :-S