Clean It Up

UK General Cleaning Forum => General Cleaning Forum => Topic started by: concept on June 09, 2010, 06:50:08 pm

Title: Recoil Starter Jammed
Post by: concept on June 09, 2010, 06:50:08 pm

As title, recoil starter jammed on pressure washer, comes out about an inch only, any ideas?

Title: Re: Recoil Starter Jammed
Post by: Blast Off Stoke on June 09, 2010, 07:23:44 pm

Might be wrapped around itself inside,take caution if taking bits i think there may be a spring inside under tension .maybe someone with more knowledge will know  ???

Title: Re: Recoil Starter Jammed
Post by: concept on June 09, 2010, 08:16:03 pm

bizarrely, i have gone out to take the cover off, and investigate, and it's pulled straight out!! strange.

will have to keep an eye on this i feel!

Title: Re: Recoil Starter Jammed
Post by: BDCS on June 09, 2010, 09:58:45 pm

Has the machine been on its side? if it does it again remove the plug and try again as it sounds like it may have hydrauliced up, it can be a carb problem if its not fell over

Title: Re: Recoil Starter Jammed
Post by: wezzy32 on June 10, 2010, 05:59:43 pm

I HAD THIS PROB ALL I DID WAS TAKE PLUG OUT AND PULLED A FEW TIMES THEN PLUG BK ON FULE ON JOB DUN