Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: the red carpet on August 26, 2005, 12:16:32 am

Title: cfr pump up sprayer
Post by: the red carpet on August 26, 2005, 12:16:32 am

this may sound like a stupid question but iv just brought a cfr pump up sprayer and i cant get it to work im presuming you just fill it up pump it up and of you go, iv done this and nothing happens there's no pressure building up am i doing somthing wrong or is it just faulty?

Title: Re: cfr pump up sprayer
Post by: nick.solution on August 26, 2005, 08:52:42 am

Hi Red carpet


could be that the lid has not sealed correctly and is leaking,

Best regards Nick

Title: Re: cfr pump up sprayer
Post by: the red carpet on August 26, 2005, 10:24:58 am

thanks for the response nick
so what can i do about this then other than taking of the lid of and putting it back on as iv tried that several times?

Title: Re: cfr pump up sprayer
Post by: Mark Roberts on August 26, 2005, 02:37:27 pm

I think you may have the same problem I had.

In the black middle part which you pump up there is a internal seal. If you take the middle bit apart you will see this seal has turned at 45 degrees which is why there is no pressure. When I repaired mine this problem kept coming back. Answer, take it back or chuck it away like I did and get an orion.

Mark

Title: Re: cfr pump up sprayer
Post by: Kinver_Clean on August 26, 2005, 07:31:37 pm

I would suggest you talk to them and ask what to do. If that dont work ask for your hard earned pennies back.

Trevor