Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Dave. on June 07, 2010, 11:17:36 am
-
Hi,
I'm just putting together a WFP system in a smallsh box trailer I have.
My TDS is 38 to 42 so I'm just using an 11 litre DI. I'm planning to fill the tank with tap water, and pass it through the DI. is it best to assemble in the following order?
tank >> pump >> DI >>WFP
or
tank >> DI >> Pump >> WFP
The other thing I'm not sure about is whether or not I can mount the pump above the tank (250litre horizontal) or does it have to be level or lower?
Or, is there an alternative 12v pump that will work above tank?
I haven't bought the pump / controller yet - but I was looking at a flojet or shurflo 100psi types.
Any advice would be gratefully received....
Cheers, Dave
-
tank >> pump >> DI >>WFP
i hqve had my pump above tank and never had problems
-
Hi,
I'm just putting together a WFP system in a smallsh box trailer I have.
My TDS is 38 to 42 so I'm just using an 11 litre DI. I'm planning to fill the tank with tap water, and pass it through the DI. is it best to assemble in the following order?
tank >> pump >> DI >>WFP
or
tank >> DI >> Pump >> WFP
The other thing I'm not sure about is whether or not I can mount the pump above the tank (250litre horizontal) or does it have to be level or lower?
Or, is there an alternative 12v pump that will work above tank?
I haven't bought the pump / controller yet - but I was looking at a flojet or shurflo 100psi types.
Any advice would be gratefully received....
Cheers, Dave
hi dave
I would firstly go with tank pump di wfp.
To be honest i put my pump at a low level so its easier for the pump to pump water,the higher the pump the more psi you need to use.Ive got a flojet pump and never had any problems with it.