Clean It Up
UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: Steve_c on May 17, 2010, 09:45:37 pm
-
Do any of you ionic users have a pro 6?
-
seems like a big no.
-
yes mate looks that way
-
ive got one whats your question
-
Yes how can I help you
-
OK guys how long is your colour change resin lasting?
-
It really depends on how much water you are using?
What TDS water is going into the TDS filter?
-
650lts per day. I make my water at 002 rising to 005 at the end of the fill. What i did yesterday was remove the pipe going into the resin filter and took a reading before resin and it read 006. The filter has been on about 3 weeks and it's nearly brown from blue. I'm still getting 000 after resin, but my last resin filter only lasted 8 weeks, surly it should last longer than that, as my first filter lasted 8 months. I'm thinking it could be the roback filter putting higher tds water back in to the system as the reading i took yesterday was 006 befor resin.
-
hi
what is your tds reading when you filling ?
-
what is the pressure when you filling up?
-
650lts per day. I make my water at 002 rising to 005 at the end of the fill. What i did yesterday was remove the pipe going into the resin filter and took a reading before resin and it read 006. The filter has been on about 3 weeks and it's nearly brown from blue. I'm still getting 000 after resin, but my last resin filter only lasted 8 weeks, surly it should last longer than that, as my first filter lasted 8 months. I'm thinking it could be the roback filter putting higher tds water back in to the system as the reading i took yesterday was 006 befor resin.
Hi - at the moment our TDS filter is also lasting no time at all - about 3 fills and its gone, they used to last month's.
We intend to replace it with a resin tank that holds about 25 litres of Dowex MB50, It might not look as pretty, but it will definately work better and last a lot longer.
-
I have heard we are not the only ones with resin not lasting with the pro6. I think it's all down to that ro- back filter putting crap water back in to the tank. Yes Darren I'm probably going to do the same. I'm sure i can make it look good. I really rate ionics but this resin issue is really letting them down.
-
what is the pressure when you filling up?
Thanks for your email mate I'll let you know what happens.
-
I have heard we are not the only ones with resin not lasting with the pro6. I think it's all down to that ro- back filter putting crap water back in to the tank. Yes Darren I'm probably going to do the same. I'm sure i can make it look good. I really rate ionics but this resin issue is really letting them down.
Its a big earner for them.
I think the older systems were better in the fact that they used DI tanks instead of the linear filters.
Personally I have never liked the colour change resin.
-
Thanks lads for all the phone calls and emails. Very interesting we are all having the same problems. Good to talk to Darren, Steve'o Steve Chris and Frank,. Well I'm going to change over to a DI vessel.
-
iv recently changed my resin filter on pro 5 and that is goin brown really quickly maybe ionics have changed there resin suppliers to a cheaper alternative. mine has only had a few fills of a 650litre tanks and id sy its about a fifth brown already from the left!!
-
iv recently changed my resin filter on pro 5 and that is goin brown really quickly maybe ionics have changed there resin suppliers to a cheaper alternative. mine has only had a few fills of a 650litre tanks and id sy its about a fifth brown already from the left!!
Get your self a DI Tank like the rest of us.
-
What a dreadful reputation Ionics seem to have on here. I always thought they were the bees knees? ::)
-
Dave i think your a bit of the mark. Its a resin issue not the whole package. I have had a long chat with ionics today and I'm told of what i can do to improve the consumption of resin,which includes fitting a DI,as it turns out it's really quite simple. But surprisingly your knocking them.
-
I'm not knocking them at all - you guys with their kit are doing a good job of that.
I contacted them when I started up amongst others. Found the guy on the phone very good. If I had the money back then I may have gone with them (they are just down the road).
I had always been told their equipment was the best but reading the posts on here, they don't seem to have got it right lately. One guy complaining his pole was crap, others complaining their resin is rubbish, someone else complained of poor customer service - they couldn't work because the resin tube they sent was broken and had to wait days for a new one. - I didn't say that.
-
RO BAK is buggered!
Only had about 8000 litres of water go through since new?
Hopefully Steve had good results whilst speaking with them today. Did they manage to sort things out, and let you know whats what. Good talking with you on the phone today.
I will call them tomorrow and see what is what.
-
hi darran
Pro 6 sounds like rubish...
Why dont you convert to pro 5
I think ro bak damages ro...
-
hi darran
Pro 6 sounds like rubish...
Why dont you convert to pro 5
I think ro bak damages ro...
Hi, We ordered a new RO BAK, and whilst we were waiting for it, we just connected a hose where it should have been. Guess what :P The water going into the Blue colour change filter was at 017 ppm, and when we filled the tank hardly anything had turned brown. We got the new RO-BAK today, installed it and noticed that 1700 ppm was coming out of it into the Blue Colour change filter ??? Thats why we have changed so many blue filters probably, about 1 every 3 or 4 fills. So now we have removed the RO - BAK altogether and re filled today, we will know for definate this next few days, maybe it is the RO - BAKS that are faulty?
We did phone Ionics, but they couldn't say what the problem could be.
-
hi
I ve got mate who has pro 6 .
He had a smilar problems
Ro bak is damaging ro
I ve got pro 5 300 lt
I bought booster pump from ionic .
Filling time is 70 min.
Water goes in more then 6 bar pressure.
My tds reading is 0.02 or 0.03 ppm
What goes in what comes out.
You wont be needing blue resin at all
-
hi
I ve got mate who has pro 6 .
He had a smilar problems
Ro bak is damaging ro
I ve got pro 5 300 lt
I bought booster pump from ionic .
Filling time is 70 min.
Water goes in more then 6 bar pressure.
My tds reading is 0.02 or 0.03 ppm
What goes in what comes out.
You wont be needing blue resin at all
I always said the Pro 5 was the best ;D