Clean It Up
Market Place => Used Equipment For Sale/Wanted => Topic started by: richie on May 13, 2010, 10:11:17 pm
-
FOR SALE
20 hp air cooled Honda GX620 petrol engine. This engine is about 8 yrs old however it only done about 1500 hours max. Removed it from a Hydramaster Crossfire 4.2
Roots 45 vac blower. Good working order. Removed from Hydramaster Crossfire 4.2. These blowers were also fitted to early Maxx 450D, Crossfire 4.2 & 4.4, Spitfire 4.0
Hydracell high pressure water pump. Good working order. Removed from Hydramaster Crossfire 4.2. These pumps were fitted to the Crossfire 4.2 & 4.4.
Heat exchangers, Removed from Hydramaster Crossfire 4.2. Could easily adapted to fit other truckmounts.
Hydramaster Crossfire frame / chasis.
Waste tank. fitted to Crossfire range. Dual vac ports
Prochem hose reel. fits 200 - 250 vac / solution hose (hose not included)
2 inch vacuum hose. Used but in good condition.
Prochem Cub XL, needs attention / TLC. Its got a 16hp B&S engine, vac blower, high pressure water pump, heat exchanger. Ideal buyer is someone with abit of time to spare. Comes with waste tank.
If anyone is interested in any of the above then either message below or snd me a PM. I am open to offers on all of the above items.
Richie.
-
Hi
Please give me a call I am interested in the Cub frame etc
thanks
Brian 07900 264152
-
Hi Brian,
Have tried to call you but cant get through. Give me a call on 07939 341 116.
Richie.
-
Richie
What attention is needed for the prochem?? how much you looking for it?
You can e mail if you like: paul@pjcleaning.biz
Cheers
Paul
-
HydraCell water pump now sold.....Thank you Tony.
Paul,
Im hoping to get chance to have a look over the Cub XL this week. I will have better idea then as to what needs doing to it. To be honest it could do as been stripped down and rebuilding
richie
-
Ok thanks Richie....intersting project then !!
-
Could you make a truckmount out of the cub parts, and what exactly needs rebuilt. Also what moneys in it?
-
Here is what is available regarding truckmount parts;
3 Prochem Cub XL frames with some wiring & hoses (1 needs scrapping really)
3 vac blowers as fitted to the Prochem Cub XL
2 water pumps (1 may need rebuilding) 1 is from a Cub the other unknown
2 engine exhaust heat exchangers from a Prochem Cub XL
1 working 16hp B&S air cooled engine
3 partially stripped engines (could be used for spares)
1 waste tank for a Prochem Cub XL
1 fresh water tank for a Prochem Cub XL
1 Hydramaster Crossfire 4.2 frame with some wiring and most hoses
1 waste tank for a Hydramaster Crossfire 4.2 / 4.4
1 Honda 20hp air cooled engine as fitted to the Hydramaster Crossfire 4.2
1 Roots 45 vac blower as fitted to Hydramaster Brossfire 4.2 / 4.4, Spitfire 4.0, early Maxx 450D
1 set of heat exchangers (5) as fitted to Hydramaster Crossfire 4.2.
Gary,
With all the parts that i have available im pretty sure you could build a decent running truckmount and still have spare parts.
Richie.
-
Richie
I'm a bit short on space in the van - can you give me the approx dimensions of the reel please.
Cheers
Simon
-
Hi Simon, off the top of my head i would say its about
80 - 100cm high
80 - 100cm deep
100 - 120 cm wide (that includes the solution reel thats bolted to it is in the link below).
http://www.prochem.co.uk/truck-mount_accessories.htm
-
Cheers Richie
Will get back to you after weekend once rearranged back of van.
Simon
-
Hi,
Nice guy to do business with and well pleased with what I bought from him.
regards Tony.
-
Sorry Richie - the width is the problem.
Even allowing for the solution reel being able to go over the top of the wheel arch it leaves hardly any other storage space.
Cheers
Simon
-
Pleasure to do business with you Tony. Was good to finally meet you.
Richie.
PS
Thanks for the red wine mate ;)
-
Hi there, do you still have the truckmount in need of repair or enough bits to build one as I quite fancy another project!!
If you could email me with what sort of money you were looking at that would be great.
Regards
Simon
simon@Mastaclean.co.uk
-
Hi Simon,
I have just sent you a email.
Richie.
-
Richie could you send me an e mail with the details as well please.
cheers
Paul
paul@pjcleaning.biz
-
Did you get my email Paul?
Richie.
-
Hi, have you still got the hose reel for sale? If so how much are you after for it?
-
make me a offer mate.
-
hi how much do you want for the vac hose, regards terry
-
Hi Richie did not get e mail our spam thingy been working too hard and dumped everything ???..sorted now hopefully :-\
-
Terry, £35 per length mate