Clean It Up

UK Floor Cleaning Forum => Carpet Cleaning Forum => Topic started by: Steve. Taylor on April 30, 2010, 09:31:23 pm

Title: wand jets
Post by: Steve. Taylor on April 30, 2010, 09:31:23 pm

Need to replace the jets on one of my wands was looking at the stainless ones now stainless being a lot harder than brass would they last longer or be better in any way any one used them. or am i just talking crap ;D

Title: Re: wand jets
Post by: Mike Halliday on April 30, 2010, 09:38:00 pm

yep they will last longer I always go for SS if possible

Title: Re: wand jets
Post by: Steve. Taylor on April 30, 2010, 10:29:13 pm

Thanks mike had a gut felling but never used stainless will pay the little extra then cheers.

Title: Re: wand jets
Post by: richie on May 01, 2010, 12:51:01 am

stainless steel jets will more than pay for themselves as they will outlast brass ones by a mile.

Title: Re: wand jets
Post by: Jason Hedges on May 01, 2010, 01:02:35 am

Any ideas where to buy them?

All the best,
Jason.

Title: Re: wand jets
Post by: mitch2810 on May 01, 2010, 07:30:39 am

Hydramaster

Title: Re: wand jets
Post by: Maurice Brown on October 20, 2010, 12:11:48 am

Hi all
Have an old 10" single jet wand that I want to bring back into service, can anyone recommend a jet size?

Title: Re: wand jets
Post by: Jim_77 on October 20, 2010, 01:30:23 am

[============== this big =================]

:)

Title: Re: wand jets
Post by: Mike Halliday on October 20, 2010, 06:30:59 am

11006 maybe......usually it depends on the hieght of the jet above the carpet

Title: Re: wand jets
Post by: Maurice Brown on October 22, 2010, 10:23:20 pm

Thanks Mike...

Was thinking maybe 110 04 - 06.  Jet height 5" above carpet.  Removed the original jet years ago for something else I was doing at the time.

Many thanks for the info.