Re: Chemtex Panther
« Reply #20 on: April 30, 2009, 10:33:42 pm »
I'm underweight by about 20lbs

Need to dust off them dumbells.




Clinton, read it again. ;D

clinton

Re: Chemtex Panther
« Reply #21 on: April 30, 2009, 10:35:27 pm »
Mike ;D

Its close mike ???

Did you go to weighbridge to get your ticket ???

derek west

Re: Chemtex Panther
« Reply #22 on: April 30, 2009, 10:54:08 pm »
i changed my posts cos dave was moaning i'd gone off topic.
its his thread.
who am i  to interfere.
i'll know better next time.

or5 shoould i just put ...... oops 4 the finally.

derek

Re: Chemtex Panther
« Reply #23 on: April 30, 2009, 11:20:29 pm »
Any more of your lip Derek and i'll pop round your street with  scales and disguss which bits of kit you need to take off your van?
 ;D

Joking aside fellas it would be worth you all checking the wieght of your vehicles before the govening bodies do.
its not funny being stopped the impications are dier to say the least.
When it happened to me it put paid to quite a few days work while I sorted out my kit.
i.e if I had a padding job to do I had to empty all my water before I could load a rotary. And if I wanted to extract on another job I could only fill the tank at the house I was working at and make sure all tanks were empty before I left.

Talk about ball ache  >:(

Re: Chemtex Panther
« Reply #24 on: April 30, 2009, 11:25:26 pm »
Dave

Do you think my setup is below the limit? I will get it weighed when I put the reel in.

clinton

Re: Chemtex Panther
« Reply #25 on: April 30, 2009, 11:28:08 pm »
Dave

Its an instant ban if your vehicle is over the limit or a bit of poridge ???

Re: Chemtex Panther
« Reply #26 on: April 30, 2009, 11:29:49 pm »
looking at yours I'd say yes.

Here is a picture of mine with the tanks empty  and what I have on the van the contents of the racking and the RX puts me over weight!

clinton

Re: Chemtex Panther
« Reply #27 on: April 30, 2009, 11:29:57 pm »
Mike

Dont think you will be over as its a small unit..

Re: Chemtex Panther
« Reply #28 on: April 30, 2009, 11:35:26 pm »
LOL

Just read your answer Dave. I thought I'd written is it over?. :o :o :o ;D

Clinton

They even do a cavity search make sure you ain't hiding something heavy.  ;D

Re: Chemtex Panther
« Reply #29 on: April 30, 2009, 11:37:25 pm »
Mike you do not have enough kit to be over the limit ;D

Re: Chemtex Panther
« Reply #30 on: April 30, 2009, 11:38:54 pm »
What even with the Kirby?

John Gregory

  • Posts: 153
Re: Chemtex Panther
« Reply #31 on: April 30, 2009, 11:41:47 pm »
i changed my posts cos dave was moaning i'd gone off topic.
its his thread.
who am i  to interfere.
i'll know better next time.

or5 shoould i just put ...... oops 4 the finally.

derek
  Sorry  derek

John

Re: Chemtex Panther
« Reply #32 on: April 30, 2009, 11:42:27 pm »
No Mike all you need is one of these full of water and your well on your way to getting a ticket

Steve Chapman

  • Posts: 1743
Re: Chemtex Panther
« Reply #33 on: April 30, 2009, 11:43:43 pm »
back to the original question, we run a panther 18 and have had it for three years and been trouble

free, i think they are perfect for any one not too mechanically minded as is so easy to work on, no frills

just the bare basics !

def be interested in joining in to buy parts etc

regards
steve


Re: Chemtex Panther
« Reply #34 on: April 30, 2009, 11:45:50 pm »
Brilliant Steve I'll drop you an e-mail when we have more info ;)

clinton

Re: Chemtex Panther
« Reply #35 on: May 01, 2009, 08:37:40 am »
Mike ;D

Hope the cavity search proves negative :D

kevin sparrow

  • Posts: 94
Re: Chemtex Panther
« Reply #36 on: May 01, 2009, 11:21:19 am »
Dave

As you know I run a Panther 25 and would be interested,good idea

Thanks


ady

Re: Chemtex Panther
« Reply #37 on: May 01, 2009, 10:26:43 pm »
Dave, got the 20  hp  model ,count me in , by the way was going to contact you about my machine  if you could email me your tel number , will give you a bell   .  regards Ady

Re: Chemtex Panther
« Reply #38 on: May 01, 2009, 11:00:28 pm »
No prblem Ady you can call anytime in the day on  07947 470 307