JetVac Cleaning

  • Posts: 266
Yanmar l100 ignition switch?
« on: May 01, 2014, 08:42:18 pm »
Anyone know where I could get a new one as my machine nearly fried itself today after this switch failed and didn't spring back

Rob_Mac

Re: Yanmar l100 ignition switch?
« Reply #1 on: May 01, 2014, 08:47:22 pm »
We broke just about every button that was ever put on my Hiltas.

You can put any button on them, in it's own box. For a longtime we just touched bare wires to start one of the machines. I don't condone doing that though - I'll say that before PC Christopher pulls me up!

Rob ;D

JetVac Cleaning

  • Posts: 266
Re: Yanmar l100 ignition switch?
« Reply #2 on: May 01, 2014, 08:54:41 pm »
I really wanted that same one because it bolts to the washer through a hole near the uploader where it should be. If I can't get one I will have to just get any switch. Is it likely to of done any damage where the starter motor must of been trying to start the engine as it was running for about 15 minutes. I only noticed because I could smell burning electrics when I stepped into the van

Rob_Mac

Re: Yanmar l100 ignition switch?
« Reply #3 on: May 01, 2014, 08:58:38 pm »
The quickest way to check whether it has caused damage to the starter motor is to cross the wires

Rob ;D

Rob_Mac

Re: Yanmar l100 ignition switch?
« Reply #4 on: May 01, 2014, 09:00:12 pm »
For the switch speak to Leek enny

Rob ;D


Rob_Mac

Re: Yanmar l100 ignition switch?
« Reply #6 on: May 01, 2014, 09:14:31 pm »
Like a knight in shining armour he comes to the rescue. From a land called Crosby, distant, mysterious.

People bow down in his wake and cheer his every word

Hurrah, Hurrah, Hurrah

Rob ;D

JetVac Cleaning

  • Posts: 266
Re: Yanmar l100 ignition switch?
« Reply #7 on: May 01, 2014, 09:39:56 pm »
Just ordered one , cheers for the help

Rob_Mac

Re: Yanmar l100 ignition switch?
« Reply #8 on: May 01, 2014, 09:42:43 pm »
Is the starter motor ok?

Rob ;D

JetVac Cleaning

  • Posts: 266
Re: Yanmar l100 ignition switch?
« Reply #9 on: May 01, 2014, 10:13:03 pm »
It's turning over and firing up fine so hoping there is no damage

BDCS

  • Posts: 4777
Re: Yanmar l100 ignition switch?
« Reply #10 on: May 01, 2014, 11:13:35 pm »
Worth a look at L S engineers for plant spares

Kenny83

  • Posts: 1131
Re: Yanmar l100 ignition switch?
« Reply #11 on: May 02, 2014, 03:18:27 am »
Like a knight in shining armour he comes to the rescue. From a land called Crosby, distant, mysterious.

People bow down in his wake and cheer his every word

Hurrah, Hurrah, Hurrah

Rob ;D

purple aki is also from Crosby  ;D
Pressure Washing -
www.powerwashcleaning.co.uk