Trad cleaning with pure water
« on: March 31, 2006, 08:30:24 am »
What detergent do you use, when trad cleaning with pure?

Do you need less detergent?

gaza

  • Posts: 1642
Re: Trad cleaning with pure water
« Reply #1 on: March 31, 2006, 08:45:14 am »
BEAR:GG3 CUS YOUR USING SOFT WATER IN DERBYSHIRE

 GAZA
IM AT THAT AGE MY BACK GOES OUT MORE THAN I DO

Re: Trad cleaning with pure water
« Reply #2 on: March 31, 2006, 07:34:49 pm »
I have heard it said that if you use pure water, you need little or no detergent?

Any comments?

bazzup

  • Posts: 49
Re: Trad cleaning with pure water
« Reply #3 on: March 31, 2006, 07:42:10 pm »
we do some interiors and only use pure water and a squeegy drags a bit on the glass but getting good results


baz

chris@c.m.s

  • Posts: 1556
Re: Trad cleaning with pure water
« Reply #4 on: March 31, 2006, 07:53:12 pm »
Pure water has no slip I think only straight pullers would get away with useing only that unless you useing a pole that is ;D   Raises the question whether those who use gg3 are straight pullers ? 
Sussex by the sea

Re: Trad cleaning with pure water
« Reply #5 on: March 31, 2006, 10:23:24 pm »
I have heard it said that if you use pure water, you need little or no detergent?

Any comments?

If you use pure water with your normal amount of 'Fairy' you'll have soap-suds everywhere.

For some reason, pure water soaps up extremely easily.

I remember being in Devon, (or was it Cornwall?) showering, and it took forever to wash the soap off my body.

Ross prefers pure-water for squeegie work, but I prefer my normal tap water.




Morph

Re: Trad cleaning with pure water
« Reply #6 on: March 31, 2006, 10:37:12 pm »
Lately I've been using purified water in my bucket for interiors.
I put a little fairy liquid in, just enough to help the squeegee slip, probably about an eighth of normal amount, plus about 3 drops of GG4.  Works a treat.
Juggle around with the mixture until you get it right, remember:  Less is more.