Recent Posts

Pages: 1 ... 3 4 [5] 6 7 ... 10
41
Window Cleaning Forum / Re: Loncin engines
« Last post by Stoots on May 02, 2024, 06:27:31 pm »
Quote from: the king on May 02, 2024, 04:32:36 pm
Off topic a bit buy my mate has a 21lpm at 200bar and a 15 lpm 250 bar and side buy side with turbos going flat out the 15 was quicker due to the extra bar shifting the white fungus! When I upgrade my 15 I’ll be making sure I still have 250 bar

Yes im not sure why flow is deemed more important than pressure as surely more pressure means it hits the surface harder giving a deeper clean....
42
Window Cleaning Forum / Re: Loncin engines
« Last post by the king on May 02, 2024, 04:32:36 pm »
Off topic a bit buy my mate has a 21lpm at 200bar and a 15 lpm 250 bar and side buy side with turbos going flat out the 15 was quicker due to the extra bar shifting the white fungus! When I upgrade my 15 I’ll be making sure I still have 250 bar
43
Window Cleaning Rounds For Sale/Wanted / East Midlands
« Last post by clarkson on May 02, 2024, 01:07:27 pm »
Hi looking for 1k a month.or there abouts
In Leicester /cov

Would consider Solihull or Redditch areas as well

Smaller bits welcome

Cheers
John
44
Window Cleaning Rounds For Sale/Wanted / Re: Nottingham work for sale
« Last post by clarkson on May 02, 2024, 01:04:20 pm »
Hi did you sell this
John
45
Window Cleaning Forum / Re: Batch editing in Aworka
« Last post by clarkson on May 02, 2024, 01:02:07 pm »
Time to take someone on Ken rather than devalue the work
46
Window Cleaning Forum / Re: Batch editing in Aworka
« Last post by Ken_Long on May 01, 2024, 09:43:23 pm »
That's it, great stuff. Ta!
47
Window Cleaning Forum / Re: Batch editing in Aworka
« Last post by Simon Trapani on May 01, 2024, 09:00:52 pm »
Yes. Go into the jobs tab. Select the rounds, jobs etc you want to batch edit & select ‘edit job details’.
48
General Cleaning Forum / what lance for tall lads
« Last post by rb4no on May 01, 2024, 08:04:48 pm »
Recently purchased a 1200mm stainless lance with a bend in it thinking it would help with me being tall (6'2) to avoid back and neck ache from my much shorter lance. Thing is I found that the extra length acted like a lever with the turbo nozzle pushing up and think it was actually worse!!! What do you tall lads find useful?
49
Window Cleaning Forum / Batch editing in Aworka
« Last post by Ken_Long on May 01, 2024, 05:30:29 pm »
Due to taking on a load of new work in the last few months, and wanting to maintain my sanity, I'm looking to shift the frequency of my visits from 4 to 5 or maybe even 6 weeks. (TBH, it's been 5 weeks for a while, I just don't want to have to keep manually shifting the work around!)
Does anyone know if there's a way to batch edit existing jobs in Aworka. I can see how to change the default interval in settings, but not sure if that only applies to new jobs.
50
Window Cleaning Forum / Re: Loncin engines
« Last post by zesty on May 01, 2024, 01:45:08 pm »
Quote from: Smudger on May 01, 2024, 12:38:14 pm
Just to be technical - 23 LPM - will be the pump - the engine is in HP  ;D

Of course!!!

In fact mines a 21lpm pump, but with a slightly different reduction setup, giving me just a smidge under 23lpm.

I run AR pumps, never had an issue. Some prefer interpump.

I was just saying it all in short hand, a Loncin engine with 23lpm out the pump.
Pages: 1 ... 3 4 [5] 6 7 ... 10