Clean It Up

UK Window Cleaning Forum => Window Cleaning Forum => Topic started by: H MAN on May 16, 2015, 12:03:29 pm

Title: STRENGTHEN WEAK POINT MODIFIED SQUEEGEE CHANNELS
Post by: H MAN on May 16, 2015, 12:03:29 pm

People have told me the reason they reluctant to do this to there squeegee channels.
They might drop the squeegee and the piece that is bent might break off.
This gives the modified channel ends strength where cut is also looks as though it was meant to be like that.
Easy to applie/work with and sets like steel.
https://www.youtube.com/watch?v=0kO3fsdbgy4
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpt1/t31.0-8/11221663_10206903462973506_7802931583822292630_o.jpg)

Title: Re: STRENGTHEN WEAK POINT MODIFIED SQUEEGEE CHANNELS
Post by: Dave Willis on May 17, 2015, 07:33:48 am

Ermmmm, if it broke off then just hacksaw three or four mm off the end and redo it.  ???
I don't usually saw anything - just bend the tip in with long nosed pliers on the back of the channel.

Title: Re: STRENGTHEN WEAK POINT MODIFIED SQUEEGEE CHANNELS
Post by: H MAN on May 17, 2015, 07:58:55 am

Quote from: Dave Willis on May 17, 2015, 07:33:48 am

Ermmmm, if it broke off then just hacksaw three or four mm off the end and redo it.  ???
I don't usually saw anything - just bend the tip in with long nosed pliers on the back of the channel.

You are right Dave ,
Have done another way to do this without using a hacksaw ;)
Will be putting up another post showing how it looks after it is done ;D