UK Floor Cleaning Forum > Carpet Cleaning Forum
Hard floor cleaning
(1/1)
Alex:
I need some help guys, I've been asked to quote a price on cleaning a shop floor. The floor is white marble effect tiles and plastic wood effect type strips down the middle, I was thinking about using the Ashbys floor tool with V2 steam mate! The floors not been cleaned for 4 years, however, it's not to bad just dirty under the corners.
Any advice is welcome
Alex
Eric:
Hi Alex
I would use a rotary with either a polypropane scrubbing brush or 15” green pad and wet pick up. Is the finish to be left plain or polished?
Eric
Special_Clean_Team:
Yes i would ask you the same question actually is it to be left polished i do a lot of hard flooring in schools i would spray clean it with a rotary machine and a green pad, finishing off with a red or buff pad giving it a shine.
If a floor is quite dirty i would do the same as Eric then just finish off with the red or buff which gives a shine you'd really need to find out how the finish is to be left.
Alex:
cheers guys
Navigation
[0] Message Index
Go to full version