Clean It Up

UK Floor Cleaning Forum => Hard Floor Cleaning Forum => Topic started by: Doug Holloway on June 09, 2012, 10:06:02 am

Title: Marble Floor Clean and Polish
Post by: Doug Holloway on June 09, 2012, 10:06:02 am

Hi Guys

I have an enquiry to clan and polish a marble floor.

I have two rotaries one 4560 and the other 180.

I also have a spinner attached to a Truck Mount, what woyuld you recommend.

Obviously I would avoid anything acidic.

Cheers

doug

Title: Re: Marble Floor Clean and Polish
Post by: Nigel_W on June 09, 2012, 12:43:09 pm

Hi Doug,

I would recommend a training course. :)

Nigel

Title: Re: Marble Floor Clean and Polish
Post by: craignozza on June 09, 2012, 01:09:15 pm

What kind of marble is it?

Title: Re: Marble Floor Clean and Polish
Post by: Jamie Pearson on June 09, 2012, 01:15:22 pm

Is it definately marble?

Don't run the spinner above 800psi. In fact only use it if you don't have a squeegee.

Title: Re: Marble Floor Clean and Polish
Post by: mark shannon on June 09, 2012, 04:19:10 pm

Doug a good clean and rinse followed by Klindex polishing powder with 150rpm with a natural fibre pad should do the trick.

 But short of a training course take a pic send it to Kev and he will tell you what to.

mark

Title: Re: Marble Floor Clean and Polish
Post by: Doug Holloway on June 09, 2012, 05:26:18 pm

Hi Guys

I am aware that I am out of my comfort zone and need to attend a training course.

However I am pretty busy with CC and don't know whether to do one.

Thanks for the replies.

Cheers

Doug

Title: Re: Marble Floor Clean and Polish
Post by: RichardBardsley on June 11, 2012, 11:47:42 am

Speak to Crawshawd or commonly known as the Stone Doctor, just Google it They will advice you and supply.

Title: Re: Marble Floor Clean and Polish
Post by: Kev Martin on June 12, 2012, 05:18:41 am

Quote from: Doug Holloway on June 09, 2012, 05:26:18 pm

Hi Guys

I am aware that I am out of my comfort zone and need to attend a training course.

However I am pretty busy with CC and don't know whether to do one.

Thanks for the replies.

Cheers
T
Doug

Doug

If you are really busy with the CC then just send me a few pictures and I will see if I can help.

Kev Martin
Marblelife Ltd